<p>AB1 Roller rods are individually built in Italy for big-game fishing. The range combines composite blanks with removable full-carbon butts, Full Floating roller guides and titanium tip-tops. Each blank is tested under load; underwraps and triple guide wraps are individually resin-coated, followed by three coats of Ultra V finish.</p><p>AB1 rods are individually built in Italy with blanks developed for each model rather than taken from a standard catalogue. Each blank is tested under load, and the finished equipment is assessed both in the laboratory and at sea. The construction combines carbon fibres and a polymer matrix, with fibre direction and layering chosen to obtain the required mechanical properties. Epoxy resins provide adhesion, chemical resistance and dimensional stability, while unidirectional fabrics place reinforcement where it is needed. AB1 manufactures its own structural carbon components within its production chain. Carbon butts and reel seats are designed to work with the flex of the blank while allowing practical dismantling where specified. Full Floating roller guides, on models equipped with them, follow the curve of the blank and are suitable for monofilament and braided line. AB1 consultants, engineers and rod builders can develop personalised equipment to suit an angler’s technical and finish requirements. Consult the model table for the components, dimensions and ratings of the version offered.</p><table><thead><tr><th>Code</th><th>Model</th><th>Sections</th><th>Length</th><th>Line rating (unit as listed)</th><th>Roller guides</th><th>Weight</th><th>Butt</th></tr></thead><tbody><tr><td>20199X</td><td>AB1 Roller 130</td><td>ONE-PIECE</td><td>1,72 mt</td><td>1300 LBS</td><td>AB1 ROLLER ALLUMINIUM</td><td>970 gr</td><td>Curved/Straight</td></tr></tbody></table><p>The table lists 1300 lb, whereas the model name is Roller 130. Confirm the line rating before choosing.</p>
Price €1,579.00
AB1 Roller 30
<p>AB1 Roller rods are individually built in Italy for big-game fishing. The range combines composite blanks with removable full-carbon butts, Full Floating roller guides and titanium tip-tops. Each blank is tested under load; underwraps and triple guide wraps are individually resin-coated, followed by three coats of Ultra V finish.</p><p>AB1 rods are individually built in Italy with blanks developed for each model rather than taken from a standard catalogue. Each blank is tested under load, and the finished equipment is assessed both in the laboratory and at sea. The construction combines carbon fibres and a polymer matrix, with fibre direction and layering chosen to obtain the required mechanical properties. Epoxy resins provide adhesion, chemical resistance and dimensional stability, while unidirectional fabrics place reinforcement where it is needed. AB1 manufactures its own structural carbon components within its production chain. Carbon butts and reel seats are designed to work with the flex of the blank while allowing practical dismantling where specified. Full Floating roller guides, on models equipped with them, follow the curve of the blank and are suitable for monofilament and braided line. AB1 consultants, engineers and rod builders can develop personalised equipment to suit an angler’s technical and finish requirements. Consult the model table for the components, dimensions and ratings of the version offered.</p><table><thead><tr><th>Model</th><th>Sections</th><th>Length</th><th>Line rating (unit as listed)</th><th>Roller guides</th><th>Weight</th><th>Butt</th></tr></thead><tbody><tr><td>AB1 Roller 30</td><td>ONE-PIECE</td><td>1,72 mt</td><td>30 LBS</td><td>AB1 ROLLER ALLUMINIUM</td><td>860 gr</td><td>Curved/Straight</td></tr><tr><td>AB1 Roller 30</td><td>ONE-PIECE</td><td>1,72 mt</td><td>30 LBS</td><td>AB1 ROLLER TITANIUM</td><td>860 gr</td><td>Curved/Straight</td></tr><tr><td>AB1 Roller 30</td><td>ONE-PIECE</td><td>1,72 mt</td><td>30 LBS</td><td>ABI ROLLER CARBON</td><td>860 gr</td><td>Curved/Straight</td></tr></tbody></table>
Price €1,179.00
AB1 Roller 50
<p>AB1 Roller rods are individually built in Italy for big-game fishing. The range combines composite blanks with removable full-carbon butts, Full Floating roller guides and titanium tip-tops. Each blank is tested under load; underwraps and triple guide wraps are individually resin-coated, followed by three coats of Ultra V finish.</p><p>AB1 rods are individually built in Italy with blanks developed for each model rather than taken from a standard catalogue. Each blank is tested under load, and the finished equipment is assessed both in the laboratory and at sea. The construction combines carbon fibres and a polymer matrix, with fibre direction and layering chosen to obtain the required mechanical properties. Epoxy resins provide adhesion, chemical resistance and dimensional stability, while unidirectional fabrics place reinforcement where it is needed. AB1 manufactures its own structural carbon components within its production chain. Carbon butts and reel seats are designed to work with the flex of the blank while allowing practical dismantling where specified. Full Floating roller guides, on models equipped with them, follow the curve of the blank and are suitable for monofilament and braided line. AB1 consultants, engineers and rod builders can develop personalised equipment to suit an angler’s technical and finish requirements. Consult the model table for the components, dimensions and ratings of the version offered.</p><table><thead><tr><th>Code</th><th>Model</th><th>Sections</th><th>Length</th><th>Line rating (unit as listed)</th><th>Roller guides</th><th>Weight</th><th>Butt</th></tr></thead><tbody><tr><td>201992</td><td>AB1 Roller 50</td><td>ONE-PIECE</td><td>1,72 mt</td><td>50 LBS</td><td>AB1 ROLLER ALLUMINIUM</td><td>860 gr</td><td>Curved/Straight</td></tr><tr><td>202536</td><td>AB1 Roller 50</td><td>ONE-PIECE</td><td>1,72 mt</td><td>50 LBS</td><td>AB1 ROLLER TITANIUM</td><td>860 gr</td><td>Curved/Straight</td></tr><tr><td>202535</td><td>AB1 Roller 50</td><td>ONE-PIECE</td><td>1,72 mt</td><td>50 LBS</td><td>ABI ROLLER CARBON</td><td>860 gr</td><td>Curved/Straight</td></tr></tbody></table>
Price €1,279.00
AB1 Roller 80
<p>AB1 Roller rods are individually built in Italy for big-game fishing. The range combines composite blanks with removable full-carbon butts, Full Floating roller guides and titanium tip-tops. Each blank is tested under load; underwraps and triple guide wraps are individually resin-coated, followed by three coats of Ultra V finish.</p><p>AB1 rods are individually built in Italy with blanks developed for each model rather than taken from a standard catalogue. Each blank is tested under load, and the finished equipment is assessed both in the laboratory and at sea. The construction combines carbon fibres and a polymer matrix, with fibre direction and layering chosen to obtain the required mechanical properties. Epoxy resins provide adhesion, chemical resistance and dimensional stability, while unidirectional fabrics place reinforcement where it is needed. AB1 manufactures its own structural carbon components within its production chain. Carbon butts and reel seats are designed to work with the flex of the blank while allowing practical dismantling where specified. Full Floating roller guides, on models equipped with them, follow the curve of the blank and are suitable for monofilament and braided line. AB1 consultants, engineers and rod builders can develop personalised equipment to suit an angler’s technical and finish requirements. Consult the model table for the components, dimensions and ratings of the version offered.</p><table><thead><tr><th>Code</th><th>Model</th><th>Sections</th><th>Length</th><th>Line rating (unit as listed)</th><th>Roller guides</th><th>Weight</th><th>Butt</th></tr></thead><tbody><tr><td>201993</td><td>AB1 Roller 80</td><td>ONE-PIECE</td><td>1,72 mt</td><td>80 LBS</td><td>AB1 ROLLER ALLUMINIUM</td><td>870 gr</td><td>Curved/Straight</td></tr></tbody></table>
Price €1,399.00
AKAMI NORTON ACID RODS
<p>Akami Norton is described as a boat rod for trolling and big-game fishing, with a high-modulus carbon blank, Fuji acid-wrapped guides and an aluminium reel seat. EVA grips provide handling for demanding fish such as tuna and grouper. The product is assigned to Sugoi in the catalogue; its Akami name is retained.</p><table><thead class="pestit"><tr><td>Code</td><td>Product name</td><td>Length</td><td>Sections</td><td>Transport length</td><td>Weight</td><td>Line class (lb)</td></tr></thead><tbody class="pestxt"><tr><td>287143</td><td>AKAMI NORTON ACID RODS</td><td>2,10 m</td><td>1</td><td></td><td></td><td>12 Lbs</td></tr><tr><td>287144</td><td>AKAMI NORTON ACID RODS</td><td>2,10 m</td><td>1</td><td></td><td></td><td>16 Lbs</td></tr><tr><td>287145</td><td>AKAMI NORTON ACID RODS</td><td>2,10 m</td><td>1</td><td></td><td></td><td>20 Lbs</td></tr></tbody></table>
Price €119.00
Apia Gannet Plus Floating Jacket
<p>Apia Gannet Plus is a low-profile floating fishing jacket for mobile rocky-shore fishing, rockfish, light game and eging. Each slim front pocket can hold a 3010 NDM-type lure box while helping keep the area around your feet easier to see.</p><p>The shop owner’s personal account: “It saved my life after I slipped on a rock and hit my face on a stone.”</p><p>The official Apia specification lists CORDURA Ballistic 1000×1680D fabric, Duraflex fittings, YKK Vislon zips, 50 mm side-adjustment straps, rear ventilation and reflective details. Adjustable free size; black.</p><p>The official product page reviewed does not state a self-righting function for an unconscious wearer. The personal account must not be treated as a guarantee of that performance. Tackle boxes are not stated as included.</p><iframe src="https://www.youtube.com/embed/yQtC6fXrgYo" title="Product video 1" width="560" height="315" frameborder="0"></iframe>
Price €259.00
Artico AB1 STAND UP 30S LBS
<p>The Artico AB1 Stand Up range uses unidirectional prepreg carbon in different moduli, including HM M40J, HS T700 and VV 1031 BK, with EE48 reinforcement. Eight carbon cuts of different lengths and orientations are layered by hand to tune the blank action. The AB1 roller guides have articulated attachment feet designed to follow the curve of the blank under load. This construction aims to preserve the progressive action of the rod during the fight. Consult the table for the selected power rating and assembly.</p> <table><thead class="pestit"><tr><td>Code</td> <td>Model</td> <td>Length</td> <td>Guide assembly</td> </tr></thead><tbody class="pestxt"><tr><td>5174</td> <td>AB1 STAND UP 30S LBS </td> <td>1,70 m</td> <td>ROLLER AB1 TITANIUM + CARBON CURVED BUTT</td> </tr><tr><td>5173</td> <td>AB1 STAND UP 30S LBS </td> <td>1,70 m</td> <td>ROLLER AB1 TITANIUM iridescent+ CARBON CURVED BUTT</td> </tr><tr><td>6531</td> <td>AB1 STAND UP 30S LBS </td> <td>1,70 m</td> <td>ROLLER AB1 aluminium SILVER + TIP titanium + CARBON CURVED BUTT</td> </tr><tr><td>6530</td> <td>AB1 STAND UP 30S LBS </td> <td>1,70 m</td> <td>ROLLER AB1 aluminium BLACK + TIP titanium + CARBON CURVED BUTT</td> </tr><tr><td>5178</td> <td>AB1 STAND UP 30S LBS </td> <td>1,70 m</td> <td>ROLLER AB1 aluminium GOLD + TIP titanium + CARBON CURVED BUTT</td> </tr><tr><td>5177</td> <td>AB1 STAND UP 30S LBS </td> <td>1,70 m</td> <td>ROLLER AB1 aluminium SPECIAL + TIP titanium + CARBON CURVED BUTT</td> </tr></tbody></table><iframe width="560" height="314" src="https://www.youtube.com/embed/v2a6oU0dbnQ" frameborder="0"></iframe>
Price €1,904.10
Artico AB1 STAND UP 50 LBS
<p>The Artico AB1 Stand Up range uses unidirectional prepreg carbon in different moduli, including HM M40J, HS T700 and VV 1031 BK, with EE48 reinforcement. Eight carbon cuts of different lengths and orientations are layered by hand to tune the blank action. The AB1 roller guides have articulated attachment feet designed to follow the curve of the blank under load. This construction aims to preserve the progressive action of the rod during the fight. Consult the table for the selected power rating and assembly.</p> <table><thead class="pestit"><tr><td>Code</td> <td>Model</td> <td>Length</td> <td>Guide assembly</td> </tr></thead><tbody class="pestxt"><tr><td>5176</td> <td>AB1 STAND UP 50 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 TITANIUM + CARBON CURVED BUTT</td> </tr><tr><td>5175</td> <td>AB1 STAND UP 50 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 TITANIUM iridescent+ CARBON CURVED BUTT</td> </tr><tr><td>6535</td> <td>AB1 STAND UP 50 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 aluminium SILVER + TIP titanium + CARBON CURVED BUTT</td> </tr><tr><td>6534</td> <td>AB1 STAND UP 50 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 aluminium BLACK + TIP titanium + CARBON CURVED BUTT</td> </tr><tr><td>6533</td> <td>AB1 STAND UP 50 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 aluminium GOLD + TIP titanium + CARBON CURVED BUTT</td> </tr><tr><td>6532</td> <td>AB1 STAND UP 50 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 aluminium SPECIAL + TIP titanium + CARBON CURVED BUTT</td> </tr></tbody></table><iframe width="560" height="314" src="https://www.youtube.com/embed/v2a6oU0dbnQ" frameborder="0"></iframe>
Price €1,904.10
Artico AB1 STAND UP 80 LBS
<p>The Artico AB1 Stand Up range uses unidirectional prepreg carbon in different moduli, including HM M40J, HS T700 and VV 1031 BK, with EE48 reinforcement. Eight carbon cuts of different lengths and orientations are layered by hand to tune the blank action. The AB1 roller guides have articulated attachment feet designed to follow the curve of the blank under load. This construction aims to preserve the progressive action of the rod during the fight. Consult the table for the selected power rating and assembly.</p> <table><thead class="pestit"><tr><td>Code</td> <td>Model</td> <td>Length</td> <td>Guide assembly</td> </tr></thead><tbody class="pestxt"><tr><td>6540</td> <td>AB1 STAND UP 80 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 TITANIUM + CARBON CURVED BUTT</td> </tr><tr><td>5986</td> <td>AB1 STAND UP 80 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 TITANIUM iridescent+ CARBON CURVED BUTT</td> </tr><tr><td>5922</td> <td>AB1 STAND UP 80 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 aluminium SILVER + TIP titanium + CARBON CURVED BUTT</td> </tr><tr><td>5923</td> <td>AB1 STAND UP 80 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 aluminium BLACK + TIP titanium + CARBON CURVED BUTT</td> </tr><tr><td>5972</td> <td>AB1 STAND UP 80 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 aluminium GOLD + TIP titanium + CARBON CURVED BUTT</td> </tr><tr><td>5973</td> <td>AB1 STAND UP 80 LBS</td> <td>1,70 m</td> <td>ROLLER AB1 aluminium SPECIAL + TIP titanium + CARBON CURVED BUTT</td> </tr></tbody></table><iframe width="560" height="314" src="https://www.youtube.com/embed/v2a6oU0dbnQ" frameborder="0"></iframe>
Price €2,077.90
ARTICO ABSOLUTE STAND UP 30 LBS
<p>The Artico Absolute is a stand-up drifting rod family designed to combine sensitivity with progressive power. The 30 lb model is available as a 1.80 m one-piece rod or with a detachable straight or curved butt, with 1.70 or 1.80 m builds depending on assembly. It uses six prepreg carbon types with glass reinforcement and has a listed 3.4 mm tip diameter. The 30 lb model accepts conventional guides only, in inline or spiral Acid assemblies; it is not intended for roller guides. For the described 1.80 m Acid builds, listed working and maximum drag ratings are 8/12 kg for the one-piece version and 10/14 kg for the detachable-butt version. The faster-action 50 lb model has a detachable butt and can use inline conventional guides or rollers; it must not be assembled Acid. Component options include Fuji SiC or Alconite, ALPS S6 and selected ALPS, Winthrop or Alutecnos rollers and butts. Confirm the exact model and build before ordering.</p> <table><thead class="pestit"><tr><td>Code</td> <td>Specifications</td> <td>Length</td> <td>Sections</td> <td>Power</td> <td>RING OR ROLLER</td> <td>Butt</td> <td>Grip covering</td> </tr></thead><tbody class="pestxt"><tr><td>1419-A</td> <td>inline guides FUJI SIC butt straight ALPS S1 EVA</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>30 LBS</td> <td>FUJI SIC</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1419-C</td> <td>inline guides FUJI SIC butt curved ALPS S1 EVA</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>30 LBS</td> <td>FUJI SIC</td> <td>butt curved ALPS</td> <td>EVA</td> </tr><tr><td>1419-E</td> <td>inline guides FUJI ALCONITE butt straight ALPS S1 EVA</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>30 LBS</td> <td>FUJI ALCONITE</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1419-G</td> <td>inline guides FUJI ALCONITE butt curved ALPS S1 EVA</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>30 LBS</td> <td>FUJI ALCONITE</td> <td>butt curved ALPS</td> <td>EVA</td> </tr></tbody></table>
Price €705.00
ARTICO ABSOLUTE STAND UP 30 LBS ACID
<p>The Artico Absolute is a stand-up drifting rod family designed to combine sensitivity with progressive power. The 30 lb model is available as a 1.80 m one-piece rod or with a detachable straight or curved butt, with 1.70 or 1.80 m builds depending on assembly. It uses six prepreg carbon types with glass reinforcement and has a listed 3.4 mm tip diameter. The 30 lb model accepts conventional guides only, in inline or spiral Acid assemblies; it is not intended for roller guides. For the described 1.80 m Acid builds, listed working and maximum drag ratings are 8/12 kg for the one-piece version and 10/14 kg for the detachable-butt version. The faster-action 50 lb model has a detachable butt and can use inline conventional guides or rollers; it must not be assembled Acid. Component options include Fuji SiC or Alconite, ALPS S6 and selected ALPS, Winthrop or Alutecnos rollers and butts. Confirm the exact model and build before ordering.</p> <table><thead class="pestit"><tr><td>Code</td> <td>Specifications</td> <td>Length</td> <td>Sections</td> <td>Power</td> <td>RING OR ROLLER</td> <td>Butt</td> <td>Grip covering</td> </tr></thead><tbody class="pestxt"><tr><td>1419-I</td> <td>ACID 1,80 Fuji Sic eva Alps curved 10-30 lbs</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>BEST DRAG kg 10 - MAX DRAG kg 14</td> <td>FUJI SIC</td> <td>butt curved ALPS</td> <td>EVA</td> </tr><tr><td>1419-M</td> <td>ACID 1,80 Fuji Alconite eva Alps curved 10-30 lbs</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>BEST DRAG kg 10 - MAX DRAG kg 14</td> <td>FUJI ALCONITE</td> <td>butt curved ALPS</td> <td>EVA</td> </tr><tr><td>1419-O</td> <td>ACID 1,80 Alps series S6 eva Alps curved 10-30 lbs</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>BEST DRAG kg 10 - MAX DRAG kg 14</td> <td>ALPS S6</td> <td>butt curved ALPS</td> <td>EVA</td> </tr><tr><td>1419-Q</td> <td>ACID 1,80 Fuji Sic eva Alps straight 10-30 lbs</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>BEST DRAG kg 10 - MAX DRAG kg 14</td> <td>FUJI SIC</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1419-S</td> <td>ACID 1,80 Fuji Alconite eva Alps straight 10-30 lbs</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>BEST DRAG kg 10 - MAX DRAG kg 14</td> <td>FUJI ALCONITE</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1419-U</td> <td>ACID 1,80 Alps series S6 eva Alps straight 10-30 lbs</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>BEST DRAG kg 10 - MAX DRAG kg 14</td> <td>ALPS S6</td> <td>butt straight ALPS</td> <td>EVA</td> </tr></tbody></table>
Price €775.00
ARTICO ABSOLUTE STAND UP 30 LBS ONE-PIECE
<p>The Artico Absolute is a stand-up drifting rod family designed to combine sensitivity with progressive power. The 30 lb model is available as a 1.80 m one-piece rod or with a detachable straight or curved butt, with 1.70 or 1.80 m builds depending on assembly. It uses six prepreg carbon types with glass reinforcement and has a listed 3.4 mm tip diameter. The 30 lb model accepts conventional guides only, in inline or spiral Acid assemblies; it is not intended for roller guides. For the described 1.80 m Acid builds, listed working and maximum drag ratings are 8/12 kg for the one-piece version and 10/14 kg for the detachable-butt version. The faster-action 50 lb model has a detachable butt and can use inline conventional guides or rollers; it must not be assembled Acid. Component options include Fuji SiC or Alconite, ALPS S6 and selected ALPS, Winthrop or Alutecnos rollers and butts. Confirm the exact model and build before ordering.</p> <table><thead class="pestit"><tr><td>Code</td> <td>Specifications</td> <td>Length</td> <td>Sections</td> <td>Power</td> <td>RING OR ROLLER</td> <td>Butt</td> <td>Grip covering</td> </tr></thead><tbody class="pestxt"><tr><td>1466-A</td> <td>inline guides Fuji Sic+eva+butt Alps CAH and gimbal Alps AXG</td> <td>6 ft – 180 cm</td> <td>1</td> <td>30 LBS</td> <td>FUJI SIC</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1466-B</td> <td>inline guides Fuji Alconite+eva+butt Alps CAH and gimbal Alps AXG</td> <td>6 ft – 180 cm</td> <td>1</td> <td>30 LBS</td> <td>FUJI ALCONITE</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1466-C</td> <td>inline guides Alps series S6+eva+butt Alps CAH and gimbal Alps AXG</td> <td>6 ft – 180 cm</td> <td>1</td> <td>30 LBS</td> <td>ALPS S6</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1466-D</td> <td>ACID one-piece 1,80 Fuji Sic +eva+butt Alps CAH and gimbal Alps AXG</td> <td>6 ft – 180 cm</td> <td>1</td> <td>BEST DRAG kg 8 - MAX DRAG kg 12</td> <td>FUJI SIC</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1466-E</td> <td>ACID one-piece 1,80 Fuji Alconite +eva+butt Alps CAH and gimbal Alps AXG</td> <td>6 ft – 180 cm</td> <td>1</td> <td>BEST DRAG kg 8 - MAX DRAG kg 12</td> <td>FUJI ALCONITE</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1466-F</td> <td>ACID one-piece 1,80 ALPS series S6 +eva+butt Alps CAH and gimbal Alps AXG</td> <td>6 ft – 180 cm</td> <td>1</td> <td>BEST DRAG kg 8 - MAX DRAG kg 12</td> <td>ALPS S6</td> <td>butt straight ALPS</td> <td>EVA</td> </tr></tbody></table>
Price €705.00
ARTICO ABSOLUTE STAND UP 50 LBS
<p>The Artico Absolute is a stand-up drifting rod family designed to combine sensitivity with progressive power. The 30 lb model is available as a 1.80 m one-piece rod or with a detachable straight or curved butt, with 1.70 or 1.80 m builds depending on assembly. It uses six prepreg carbon types with glass reinforcement and has a listed 3.4 mm tip diameter. The 30 lb model accepts conventional guides only, in inline or spiral Acid assemblies; it is not intended for roller guides. For the described 1.80 m Acid builds, listed working and maximum drag ratings are 8/12 kg for the one-piece version and 10/14 kg for the detachable-butt version. The faster-action 50 lb model has a detachable butt and can use inline conventional guides or rollers; it must not be assembled Acid. Component options include Fuji SiC or Alconite, ALPS S6 and selected ALPS, Winthrop or Alutecnos rollers and butts. Confirm the exact model and build before ordering.</p> <table><thead class="pestit"><tr><td>Code</td> <td>Specifications</td> <td>Length</td> <td>Sections</td> <td>Power</td> <td>RING OR ROLLER</td> <td>Butt</td> <td>Grip covering</td> </tr></thead><tbody class="pestxt"><tr><td>1545-A</td> <td>ROLLER ALPS class 30-50 LBS butt straight ALPS S2 EVA</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>50 LBS</td> <td>ROLLER ALPS class 30-50 LBS</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1545-C</td> <td>ROLLER ALPS class 30-50 LBS butt curved ALPS S2 EVA</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>50 LBS</td> <td>ROLLER ALPS class 30-50 LBS</td> <td>butt curved ALPS</td> <td>EVA</td> </tr><tr><td>1545-E</td> <td>guides FUJI SIC butt straight ALPS S2 EVA</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>50 LBS</td> <td>FUJI SIC</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1545-F</td> <td>guides FUJI SIC butt curved ALPS S2 EVA</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>50 LBS</td> <td>FUJI SIC</td> <td>butt curved ALPS</td> <td>EVA</td> </tr><tr><td>1545-G</td> <td>guides FUJI ALCONITE butt straight ALPS S2 EVA</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>50 LBS</td> <td>FUJI ALCONITE</td> <td>butt straight ALPS</td> <td>EVA</td> </tr><tr><td>1545-H</td> <td>guides FUJI ALCONITE butt curved ALPS S2 EVA</td> <td>6 ft – 180 cm</td> <td>1 1</td> <td>50 LBS</td> <td>FUJI ALCONITE</td> <td>butt curved ALPS</td> <td>EVA</td> </tr></tbody></table>
Price €719.00
ARTICO APACHE 12-20 LBS STAND UP RODS
<p>Artico Apache is an Italian-made rod for technical trolling and stand-up fishing. Its slim Dynanotex carbon blank uses a multilayer fibre layout for a responsive upper section and powerful butt, cushioning runs while maintaining control during retrieval. Fuji Alconite guides can be arranged in a conventional in-line layout or a spiral layout, depending on the build. Custom options include straight or curved butts, EVA or leather grips, wrap colours and personalised lettering. Bare blanks are also available on request. Check the selected model and specification before ordering.</p>
Price €785.00
ARTICO APACHE 50-80 LBS STAND UP RODS
<p>Artico Apache is an Italian-made rod for technical trolling and stand-up fishing. Its slim Dynanotex carbon blank uses a multilayer fibre layout for a responsive upper section and powerful butt, cushioning runs while maintaining control during retrieval. Fuji Alconite guides can be arranged in a conventional in-line layout or a spiral layout, depending on the build. Custom options include straight or curved butts, EVA or leather grips, wrap colours and personalised lettering. Bare blanks are also available on request. Check the selected model and specification before ordering.</p>
Price €985.00
