<p>Fighting support designed as an alternative to a fighting belt. Suitable for spinning and sturgeon fishing.</p><table><thead><tr><th>Code</th><th>Model</th><th>Item</th><th>Length (unit as listed)</th><th>Weight (g)</th></tr></thead><tbody><tr><td>011235</td><td>A-TEC T BAR</td><td>Black</td><td>28 cm</td><td>226</td></tr><tr><td>011236</td><td>A-TEC T BAR</td><td>Gold</td><td>28 cm</td><td>226</td></tr></tbody></table>
Price €76.00
AB1 FIGHTING BELT
<p>AB1 fighting belt for stand-up fishing, weighing 950 g. The ergonomic body is hand-built in Italy from layered structural carbon composite and fitted with soft Evazote EV50 padding. The padding is non-slip, waterproof and resistant to repeated tension and compression and to tearing. Harness straps, webbing and stainless-steel hardware are selected for marine use. Attachments are made from 316L stainless steel and the pin from F51 stainless steel. Finish: black, steel and carbon fibre.</p><p>Original material test references: waterproofing ISO 2896:2001 Ed. 3; repeated tension and compression ISO 7214:2012; tear resistance ISO 8067:2008.</p><table><thead><tr><th>Code</th><th>Variant</th></tr></thead><tbody><tr><td>201527</td><td>FIGHTING BELT - CLASSIC</td></tr><tr><td>203100</td><td>FIGHTING BELT - LIMITED 1</td></tr><tr><td>203101</td><td>FIGHTING BELT - LIMITED 2</td></tr></tbody></table><p>The earlier description contained an unclear 700C temperature value; it must not be used as an operating limit.</p>
Price €539.00
AB1 SWIVEL ROD
<p>AB1 Swivel Rod is a stainless-steel accessory with a universal rotating support for handling large fish. Inserted into a rod holder, it allows the fishing rod to rotate through 360 degrees. An adjustable friction mechanism controls movement. The body is machined from a single solid piece to avoid welded joints.</p><table><thead><tr><th>Code</th><th>Variant</th></tr></thead><tbody><tr><td>093413</td><td>SWIVEL ROD</td></tr></tbody></table>
Price €79.00
Apia Gannet Plus Floating Jacket
<p>Apia Gannet Plus is a low-profile floating fishing jacket for mobile rocky-shore fishing, rockfish, light game and eging. Each slim front pocket can hold a 3010 NDM-type lure box while helping keep the area around your feet easier to see.</p><p>The shop owner’s personal account: “It saved my life after I slipped on a rock and hit my face on a stone.”</p><p>The official Apia specification lists CORDURA Ballistic 1000×1680D fabric, Duraflex fittings, YKK Vislon zips, 50 mm side-adjustment straps, rear ventilation and reflective details. Adjustable free size; black.</p><p>The official product page reviewed does not state a self-righting function for an unconscious wearer. The personal account must not be treated as a guarantee of that performance. Tackle boxes are not stated as included.</p><iframe src="https://www.youtube.com/embed/yQtC6fXrgYo" title="Product video 1" width="560" height="315" frameborder="0"></iframe>
Price €259.00
Artico ROCKET AB1
<p>The Artico Rocket AB1 is a rod holder machined from solid AL7075 aluminium. Its adjustable orientation accommodates straight and curved rod butts, with a gimbal-locking system. A three-compartment tackle tray is included. Gloss, matt and metallic colour finishes are available; confirm the selected finish and configuration with the shop.</p>
Price €1,759.00
DAIICHISEIKO DOUBLE MAT 400
<p>The Double Mat 400 combines a rubber magnetic side with a side designed for squid lures. It mounts beneath the clamp of a Lark rod holder on either side. The mat helps organise rigs and includes a lure-cleaning brush and a space for resting the sinker. Stated external dimensions: 100 × 575 × 12 mm.</p> <table> <thead> <tr> <th>Code</th> <th>Variant</th> </tr> </thead> <tbody> <tr> <td>012505</td> <td>DOUBLE MAT 400 10X57CM.</td> </tr> </tbody> </table>
Price €66.00
DAIICHISEIKO ROD HOLDER
<p>The Rod Holder L is a synthetic-rubber rod-butt support for larger-fish fishing and jigging. It supports the rod butt against the body and can be washed with water after use. Waist-belt width: 38 mm.</p>
Price €38.90
DAIICHISEIKO ROD HOLDER CHIBI LARK GB
<p>The Chibi Lark GB is a rod holder for inflatable boats fitted with an Achilles rod-holder mounting seat. Other boats require a compatible Achilles mounting seat, purchased and installed separately. A locking pin secures the holder. The design allows left/right movement, fore/aft movement and five-step angle adjustment, with a support for quick rod attachment and removal. Supported rod diameter: up to 25 mm. Dimensions: GB holder 170 × 210 × 115 mm; rod holder 125 × 50 × 54 mm; Chibi Support 70 × 70 × 50 mm. Weight: 505 g. SS and S thin-rod adapters are included.</p> <table><thead class="pestit"><tr><td>Code</td><td>Model</td></tr></thead><tbody class="pestxt"><tr><td>012500</td><td>DAIICHISEIKO ROD HOLDER CHIBI LARK GB</td></tr></tbody></table>
Price €84.00
DAIICHISEIKO ROD HOLDER DX
<p>The Rod Holder DX is a synthetic-rubber rod-butt support secured by both a waist belt and a shoulder belt. A removable stainless-steel pin supports gimbal butts. It can be washed with water after use. Belt widths: waist 38 mm, shoulder 25 mm.</p>
Price €44.10
DAIICHISEIKO ROD HOLDER FREE STAND
<p>The Free Stand is a boat-side rod rest for putting down a rod while baiting, removing a hook or moving between fishing spots. Its shaped support helps limit sideways movement. Size: 175 × 88 × 48 mm; weight: 200 g. Clamp range: 15–85 mm, for vertical mounting only. Accepts rods up to 35 mm in diameter. A handle ring is included.</p> <table><thead class="pestit"><tr><td>Code</td><td>Model</td></tr></thead><tbody class="pestxt"><tr><td>012497</td><td>DAIICHISEIKO ROD HOLDER FREE STAND</td></tr></tbody></table>
Price €31.50
DAIICHISEIKO ROD HOLDER FREE STAND 130
<p>The Free Stand 130 is a boat-side rod rest for putting down a rod while baiting, removing a hook or moving between fishing spots. Its shaped support helps limit sideways movement. Size: 222 × 101 × 49 mm; weight: 295 g. Clamp range: 20–130 mm. Accepts rods up to 39 mm in diameter. A handle ring is included.</p> <table><thead class="pestit"><tr><td>Code</td><td>Model</td></tr></thead><tbody class="pestxt"><tr><td>012498</td><td>DAIICHISEIKO ROD HOLDER FREE STAND 130</td></tr></tbody></table>
Price €34.60
DAIICHISEIKO ROD HOLDER ICHIRO
<p>The Daiichiseiko Ichiro is a fishing-rod holder. See the table for the model and article code.</p> <table><thead class="pestit"><tr><td>Code</td> <td>Model</td> </tr></thead><tbody class="pestxt"><tr><td>012503</td> <td>DAIICHISEIKO ROD HOLDER ICHIRO</td> </tr></tbody></table>
Price €36.70
DAIICHISEIKO ROD HOLDER MINI SUPPORT
<p>The Mini Support fits rods with a diameter of 15–25 mm. Secure it where the reel clears the rod holder, with the attachment/release lever facing forwards. Tighten the left and right screws evenly; uneven tightening can deform the plastic, and excessive tightening can damage the rod. Press the support fully into the holder until it clicks into place. Size: 85 × 80 × 50 mm; weight: 120 g including the supplied SS, S and M thin-rod adapters. Made in Japan.</p> <table><thead class="pestit"><tr><td>Code</td><td>Model</td></tr></thead><tbody class="pestxt"><tr><td>012488</td><td>DAIICHISEIKO ROD HOLDER MINI SUPPORT</td></tr></tbody></table>
Price €31.50
DAIICHISEIKO ROD HOLDER NOBITARO
<p>The Nobitaro is a boat rod rest designed to fit into an existing boat rod holder and secure using its central adjusting collar. Its telescopic support provides up to 11 cm of height adjustment. Weight: 255 g. Closed dimensions: 25.5 × 7 × 5.5 cm. The source lists an internal diameter range of 4.5–5.5 cm; check compatibility with the boat fitting.</p> <table><thead class="pestit"><tr><td>Code</td> <td>Model</td> </tr></thead><tbody class="pestxt"><tr><td>012502</td> <td>DAIICHISEIKO ROD HOLDER NOBITARO</td> </tr></tbody></table>
Price €36.80
DAIICHISEIKO ROD HOLDER SUPER UKEJIRO 240
<p>The Super Ukejiro 240 is a wide-clamp two-rod holder for boat sides and similar mounting points. Its angle and swing adjustments allow the rods to be spread in a fan to reduce line interference. It can be installed vertically or horizontally; in vertical mounting the holder can be positioned on either side of the support. A lever locks the butt holder. Clamp range: 50–240 mm. Amorphous-resin body. Stored size: 365 × 90 × 55 mm; weight: 790 g. Made in Japan.</p> <table><thead class="pestit"><tr><td>Code</td><td>Model</td></tr></thead><tbody class="pestxt"><tr><td>012494</td><td>DAIICHISEIKO ROD HOLDER SUPER UKEJIRO 240</td></tr></tbody></table>
Price €73.50