Filter By

Brand

Brand

Price

Price

  • €0.00 - €628.00

Trolling Rods

Trolling Rods

There are 30 products.

Showing 1-30 of 30 item(s)

Active filters

ARTICO YUPIK VV1031 BK  6-8... ARTICO YUPIK VV1031 BK  6-8 LBS TROLLING RODS

ARTICO YUPIK VV1031 BK 6-8 LBS TROLLING RODS

<p><strong style="line-height:1.5em;">The Hi-Module Carbon VV1031 BK white<br /></strong><span style="line-height:1.5em;">With the Yupik series we are enter in the Artico Top of the range world, rods where are mixed very well the high technological expertise, the most advanced materials and attention to detail typical of the excellent craftsmanship Made in Italy. These rods are exclusive, fully customizable and ensuring incomparable performance. The VV1031 BK is a high modulus carbon fabric prepreg (this carbon is the same used in Ferrari F1) that is treated and overlapped in a completely different way compared to conventional processes . The traditional carbon fibers are unidirectional, the vast majority of companies overlap the fibers in longitudinal and transverse position to increase the responsiveness and the rods resistance to crushing. Artico adds to this processing also an angle fiber insertions to confer to all rods countless different actions based on the type of fishing. Thanks to this particular process, Artico obtain an excellent fabrics of carbon that allow the realization of the blank perfectly calibrated on casting weights indicated. Each blank is individually tested to ensure maximum performance and reliability.</span></p> <p><strong style="line-height:1.5em;">The nine differents high modulus carbon used for the rods construction</strong><span style="line-height:1.5em;"> </span></p> <p><strong>The Cosmetics</strong><br />Surely the technology and craftsmanship are the strengths of the Artico, but also the good Italian appearance it’s not underestimated. Technical features are added to aesthetic and functional: the entire rod is customizable! It is possible to buy only the blank, setting its length to suit your personal needs, or you can opt for Alconite Fuji rings or other rings guide. The installation itself can be done in a Traditional "with the rings in line " or Acid with rings mounted " spiral " solution that allows you to fish with thinner wire and casting weights lower ( recommended mounting to expert anglers). In addition, you can also choose the type of straight or curved handle covered with high quality leather or Eva. In short , you can chose all the components and customized your rods as the blank length, then you can also print your name or whatever you want on your rod. Finally, customizable ties colors: Artico realizes the Yupik rods making them unique, you will hardly find another fisherman with a rod equal to yours and if you silkscreen your name on the rod will be yours alone.</p> <p><strong>You have questions? </strong><strong>Contact me: </strong><strong><a href="mailto:info@pescare.it">info@pescare.it</a></strong></p> <p> </p> <p></p>
Price €676.20
rating 0 review
ARTICO YUPIK VV1031 BK 8-10... ARTICO YUPIK VV1031 BK 8-10 LBS TROLLING RODS

ARTICO YUPIK VV1031 BK 8-10 LBS TROLLING RODS

<p>The Carbon High Module VV1031 BK (High Module White)<br />With the Yupik series we enter the world of the Top Arctic range, a series of tools where the high technological skills, the most avant-garde materials and the attention to detail typical of the excellent Made in Italy craftsmanship are eminently mixed. They are exclusive pipes, completely customizable and guarantee inimitable performance. The VV1031 BK is a high modulus carbon fabric PrePreg (the carbon is the one of Ferrari origin used for F1) that is treated and superimposed in a completely different way than traditional processing. The traditional carbon fabrics are monodirectional, the vast majority of companies overlap in longitudinal and transversal position the fibers of the fabric to increase their resistance to crushing and reactivity, Arctic adds to this laying of the fibers also angle insertions, thus giving all the tools many different actions according to the need of fishing. Thanks to this particular processing we obtain excellent carbon fabrics that allow the realization of drums perfectly calibrated on the poundsets indicated. Each drum is individually tested to ensure maximum performance and reliability. <br />Yupik drums are manufactured using up to 9 different types of high modulus carbon to give the gear the most suitable action for the type of fishing they have to carry out.</p> <p>Cosmetics<br />Certainly, technology and craftsmanship are strong points of Arctic, but as good Italians the aesthetic aspect is not underestimated. To the technical characteristics are added the aesthetic and functional ones: all the barrel is customizable! It is possible to purchase a blank only, defining its length according to your personal needs, or you can opt for an assembly of Fuji Alconite rings or other models, also the SIC. The assembly itself can be done in a traditional way "with in-line hairs" or Acid with spiral mounted rings, a solution that allows you to fish with thinner wires and lower pounds (mounting recommended to experienced fishermen). You can also choose the type of straight or curved handle upholstered in Eva or fine leather. All components can be customized upon request. Then you can also print your name or whatever you want on your tool. Finally, you can also customize the colors of the ligatures, in short: Arctic realizes the Yupik making them unique, you will hardly find another fisherman with a barrel equal to yours and if you screen print your name over that barrel will only be yours.</p><br />
Price €630.00
rating 0 review
ARTICO YUPIK VV1031 BK... ARTICO YUPIK VV1031 BK 10-12 LBS TROLLING RODS

ARTICO YUPIK VV1031 BK 10-12 LBS TROLLING RODS

<p><strong style="line-height:1.5em;">The Hi-Module Carbon VV1031 BK white<br /></strong><span style="line-height:1.5em;">With the Yupik series we are enter in the Artico Top of the range world, rods where are mixed very well the high technological expertise, the most advanced materials and attention to detail typical of the excellent craftsmanship Made in Italy. These rods are exclusive, fully customizable and ensuring incomparable performance. The VV1031 BK is a high modulus carbon fabric prepreg (this carbon is the same used in Ferrari F1) that is treated and overlapped in a completely different way compared to conventional processes . The traditional carbon fibers are unidirectional, the vast majority of companies overlap the fibers in longitudinal and transverse position to increase the responsiveness and the rods resistance to crushing. Artico adds to this processing also an angle fiber insertions to confer to all rods countless different actions based on the type of fishing. Thanks to this particular process, Artico obtain an excellent fabrics of carbon that allow the realization of the blank perfectly calibrated on casting weights indicated. Each blank is individually tested to ensure maximum performance and reliability.</span></p> <p><strong style="line-height:1.5em;">The nine differents high modulus carbon used for the rods construction</strong></p> <p><strong>The Cosmetics</strong><br />Surely the technology and craftsmanship are the strengths of the Artico, but also the good Italian appearance it’s not underestimated. Technical features are added to aesthetic and functional: the entire rod is customizable! It is possible to buy only the blank, setting its length to suit your personal needs, or you can opt for Alconite Fuji rings or other rings guide. The installation itself can be done in a Traditional "with the rings in line " or Acid with rings mounted " spiral " solution that allows you to fish with thinner wire and casting weights lower ( recommended mounting to expert anglers). In addition, you can also choose the type of straight or curved handle covered with high quality leather or Eva. In short , you can chose all the components and customized your rods as the blank length, then you can also print your name or whatever you want on your rod. Finally, customizable ties colors: Artico realizes the Yupik rods making them unique, you will hardly find another fisherman with a rod equal to yours and if you silkscreen your name on the rod will be yours alone.</p> <p><strong>You have questions? </strong><strong>Contact me: </strong><strong><a href="mailto:info@pescare.it">info@pescare.it</a></strong></p> <p> </p><br />
Price €630.00
rating 0 review
ARTICO APACHE 6-8 LBS WITH... ARTICO APACHE 6-8 LBS WITH FUJI GUIDES

ARTICO APACHE 6-8 LBS WITH FUJI GUIDES

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €691.90
rating 0 review
ARTICO APACHE 8-10 LBS WITH... ARTICO APACHE 8-10 LBS WITH FUJI GUIDES

ARTICO APACHE 8-10 LBS WITH FUJI GUIDES

<p>Only an Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €698.50
rating 0 review
ARTICO APACHE 10-12 LBS... ARTICO APACHE 10-12 LBS WITH FUJI GUIDES

ARTICO APACHE 10-12 LBS WITH FUJI GUIDES

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €707.30
rating 0 review
ARTICO APACHE 12-20 LBS... ARTICO APACHE 12-20 LBS WITH FUJI GUIDES

ARTICO APACHE 12-20 LBS WITH FUJI GUIDES

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €792.00
rating 0 review
ARTICO APACHE TROLLING 30... ARTICO APACHE TROLLING 30 LBS WITH FUJI GUIDES

ARTICO APACHE TROLLING 30 LBS WITH FUJI GUIDES

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €792.00
rating 0 review
ARTICO APACHE TROLLING 50... ARTICO APACHE TROLLING 50 LBS WITH FUJI GUIDES

ARTICO APACHE TROLLING 50 LBS WITH FUJI GUIDES

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €764.50
rating 0 review
ARTICO APACHE TROLLING 80... ARTICO APACHE TROLLING 80 LBS WITH FUJI GUIDES

ARTICO APACHE TROLLING 80 LBS WITH FUJI GUIDES

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €687.50
rating 0 review
ARTICO APACHE TROLLING 130... ARTICO APACHE TROLLING 130 LBS WITH FUJI GUIDES

ARTICO APACHE TROLLING 130 LBS WITH FUJI GUIDES

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €732.60
rating 0 review
ARTICO APACHE TROLLING 30... ARTICO APACHE TROLLING 30 LBS ROLLER GUIDE

ARTICO APACHE TROLLING 30 LBS ROLLER GUIDE

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs. <span style="font-size:12px;line-height:1.5em;">Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:<br /></span><span style="font-size:12px;line-height:1.5em;">1-Lower carbon tissue deterioration, about 30% less than traditional methods.<br /></span><span style="font-size:12px;line-height:1.5em;">2-Higher resistance to efforts, about 40% more.<br /></span><span style="font-size:12px;line-height:1.5em;">3-Higher maneuverability<br /></span><span style="font-size:12px;line-height:1.5em;">4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</span></p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<br /><span style="font-size:12px;line-height:1.5em;">You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</span></p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €765.60
rating 0 review
ARTICO APACHE TROLLING 50... ARTICO APACHE TROLLING 50 LBS ROLLER GUIDE

ARTICO APACHE TROLLING 50 LBS ROLLER GUIDE

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €739.20
rating 0 review
ARTICO APACHE TROLLING 80... ARTICO APACHE TROLLING 80 LBS ROLLER GUIDE

ARTICO APACHE TROLLING 80 LBS ROLLER GUIDE

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p> <p></p>
Price €905.30
rating 0 review
ARTICO APACHE TROLLING 130 LBS ARTICO APACHE TROLLING 130 LBS

ARTICO APACHE TROLLING 130 LBS

<p>Only a true Italian Company has the ability to create a rod range able to completely satisfy the diverse needs of the Big Game Angler. The Apache range are handmade in Artico’s laboratory so we can proudly say that these rods are Made in Italy. The Apache Trolling was specifically designed and made for competition angling. We’re talking about a very technical product that is almost exclusively dedicated to the competition angler. The rods blank is built in Dynanotex carbon making it slim and light. During the fight the power of the fish is distributed evenly throughout the blank with the top of the rod remaining rapid and efficient in order to handle powerful runs from the fish but also to prevent breakages. The lower part of the rods blank gives power and defines the control on the fish in the recovery phase. The Apache’s series prove to be the most dedicated rods for fighting the oceans most powerful marine predators on light lines. The secret of this rod is in the use of a particular carbon, the Dynanotex.</p> <p>The Dynanotex<br />With the Apache range we enter in the world of the Artico Gamma’s Top of the range tackle. Here elevated technological skill is combined with state-of-the-art materials and attention to detail that is typical of the Made in Italy artisanship. The Dynanotex is a Fluoroelastomer (fluorocarbon-based synthetic rubber) with coated graphite and Plant Will which is a high modulus carbon PrePreg (Ferrari Formula 1 Carbon) This is treated and then overlaid in a completely different way compared to traditional machining. Carbon tissue is unidirectional and whilst the vast majority of companies overlap tissue fibers in a longitudinal and transversal way (to increase the resistance to reactivity crushing) Artico adds an additional technique which also angles this overlay. This succeeds in producing countless rod actions and allows different models to be produced according to specific fishing needs.</p> <p>Dynanotex allows the creation of blanks without “plug” namely a blank that when in action can provide a curve of work that is always optimized. The advantages of this are:</p> <p>1-Lower carbon tissue deterioration, about 30% less than traditional methods.</p> <p>2-Higher resistance to efforts, about 40% more.</p> <p>3-Higher maneuverability</p> <p>4-Higher reactivity of the tackle, more than the 50% compared to those are actually in commerce.</p> <p>Having a “spine-less” blank not only aids the action of the rod but it also enables the angler to follow and absorb any twists or lunges of the fish during the fight which helps to nullify any chance of a breakage. Artico insures the Dynanotex blanks for 20 years! You will be amazed by the “reactivity” of the rods when they are under tension as they bend themselves in a distributed way yet immediately go back in their original position (straight) which makes it so easy during the battle with big fish.</p> <p>The cosmetic<br />Artico’s strength is in its technology and craftsmanship work, though we are also proud of our aesthetics. According to Italian style standards this cannot be underestimated and our rods are both aesthetic and functional.</p> <p>The Tips<br />The tips are fully customisable, you can choose a tip with Fuji Alconite rings placed in the classic manner “in line” or with the acid “spiral” method which allows the angler to fish with thinner wires and lower poundage.There is also the option for ALPS or Winthrop roller guides with titanium guides. Usually each angler prefers to equip the Apache Trolling from 6 to 30 lb with Fuji Alconite rings. While the Apache Trolling 50/80 or 130 lb are usually built with the Roller Alps or Winthrop. Here at Artico we produce everything ourselves and for this reason we believe we are the greatest rod builders in the world.<a></a></p> <p>Fittings<br />You can choose what kind of handle you prefer, whether it be curved or straight, clad or Eva, the finest leather or even the Winthrop Butt. In conclusion we want you to know that on your demand all of the components can be personalized. We can print your name with silk-screen or customise the ligature colours. In the end, with an Artico Apache we want your rod to be unique and for that reason it is unlikely you will find two anglers with the same rod!</p> <p><span><strong>MATERIAL:</strong> High Modulus Dynanotex carbon. PrePreg Ferrari processing system.</span></p>
Price €921.80
rating 0 review
SUGOI! TROLLING CLASSIC SUGOI! TROLLING CLASSIC

SUGOI! TROLLING CLASSIC

<p>Classic è la canna da trolling studiata per i pescatori esigenti. La sua conformazione con fusto in carbonio, anelli roller in acciaio e placca porta mulinello in alluminio forgiato, garantisce alte prestazioni per la pesca a traina in profondità.</p><table><thead class="pestit"><tr><td>Codice</td><td>Modello</td><td>Lunghezza metri</td><td>Casting gr</td><td>Sezioni</td><td>Diametro mm</td><td>Ingombro cm</td><td>Peso gr</td></tr></thead><tbody class="pestxt"><tr><td>287164</td><td>CANNA TROLLING CLASSIC</td><td>1,65 metri</td><td>15-30 LBS</td><td>1</td><td>14</td><td>165</td><td>550</td></tr></tbody></table>
Price €79.00
rating 0 review
SPORTEX NEPTOON TROLLING SPORTEX NEPTOON TROLLING

SPORTEX NEPTOON TROLLING

<p>Neptoon Trolling These rods are designed to provide the power needed when trolling for cod and big salmon. Despite this, the blank is sensitive enough to dampen aggressive bites and prevent determined escape attempts. NepTooN Trolling rod can also be used to very good effect when trolling in freshwater. The rods are fitted with strong Seaguide XBG SIC guides, Seaguide DPS reel seats, durable Duplon handles and a gimbal with rubber cap from Pac Bay.</p><table><thead class="pestit"><tr><td>Codice</td><td>Modello</td><td>Modell</td><td>Art.-No.</td><td>Length cm</td><td>Length ft</td><td>Pcs.</td><td>Transp. length cm</td><td>Cast gr.</td><td>Rod weight gr.</td><td>Guides</td></tr></thead><tbody class="pestxt"><tr><td>2746165</td><td>SPORTEX NEPTOON TROLLING</td><td>JO2113</td><td>124211</td><td>2,10 metri</td><td>7</td><td>2</td><td>109</td><td>10 – 20 lbs.</td><td>325</td><td>9</td></tr><tr><td>2746166</td><td>SPORTEX NEPTOON TROLLING</td><td>JO2413</td><td>124241</td><td>2,40 metri</td><td>8</td><td>2</td><td>124</td><td>10 – 20 lbs.</td><td>359</td><td>10</td></tr><tr><td>2746167</td><td>SPORTEX NEPTOON TROLLING</td><td>JO2713</td><td>124271</td><td>2,70 metri</td><td>9</td><td>2</td><td>140</td><td>10 – 20 lbs.</td><td>364</td><td>10</td></tr></tbody></table>
Price €129.00
rating 0 review
ARTICO VELENO ARTICO VELENO

ARTICO VELENO

<p>Made in Italy is inimitable<br />A year of laboratory and fishing tests to take the mechanical characteristics of Dynanotex to the extreme. A meticulous work to reduce weights and diameters to make the drums more sensitive and reactive. Here are the new creatures of Casa Arcico, the Apache Veleno: the one-piece developed for trolling from high ground and in the 5.5 Kg model also for live trolling, with a range of use from 400 to 800 grams of guardian or sinker lead. If you are looking for an engineering masterpiece, if you want to stand out for style and performance, if you like fishing furious fish with thin rods: the Apache Veleno are the right choice!</p> <p>The range<br />This new series of trolling rods consists of three single-barrel models with respective Best Drag of 3.5Kg - 5.5Kg - 8.5Kg. Entirely handmade in the Artico laboratories, the Apache Veleno exploits the mechanical characteristics of Dynanotex combined with the meticulous processing systems of the best Italian artisans in the sector, to obtain fishing actions different from any other rod on the market.</p> <p>The Acid<br />Our Apache Veleno are also available in the Acid version, that is with the rings mounted in a spiral. This type of assembly enhances the mechanical characteristics of these tools even more by raising the Best Drag abundantly by one kg while keeping the weight unchanged.</p> <p>The Blank<br />Thanks to the use of Dynanotex we were able to obtain barrels with base diameters of about 1.2 cm, thus placing us among the thinnest and most powerful live rods on the market. 1.95 meters long, our Apache Veleno have a modular and progressive action: the high part is sensitive, the central part is nervous and the low part guarantees an unprecedented power reserve. They are very fun and reliable rods, those who have tried them no longer fish with other rods.</p> <p>The whole series can be equipped with different types of rings according to customer requests, the mounting options are: ALPS S 6 - Fuji Alconite - Fuji SiC both in line mounting and in spiral mounting (acid)</p> <table><thead class="pestit"><tr><td>Modello</td> <td>Lungh mt</td> <td>N° Sez.</td> <td>Anelli</td> <td>Best Drag</td> </tr></thead><tbody class="pestxt"><tr><td>VELENO 1<br />VELENO 2<br />VELENO 3</td> <td>1,95<br />1,95<br />1,95</td> <td>Monofusto<br />Monofusto<br />Monofusto</td> <td></td> <td>3,5 Kg<br />5,5 Kg<br />8,5 Kg </td> </tr></tbody></table>
Price €515.00
rating 0 review
AB1 Moderate AB1 Moderate

AB1 Moderate

<p>AB1 sport fishing rods are specially built for maximum performance, they are not made in bulk production, Each blank is built one by one and tested on a dyno. (geometric wall). It is a unique constructional concept and very exclusive, combined with the AB1 components. The companys philosophy out of the series of commercial dynamics provides the starting point of which each individual rod is made, dressed with sartorial quality and providing it with proven and certified mechanical specifications. AB1 designs and builds its products in a 100% closed supply chain, 100% made in Italy: blanks and components: statically tested in the laboratories and dynamically at sea with the team of experts and elite sport fishermen affiliated to the company. The decision to buy an AB1 product is like a decision to have a tailored made suit, because it dresses the passion of a sport fisherman. AB1 employs a staff of highly qualified consultants in sport fishing who listen to the customer's needs, interacting with AB1 engineers and Rod Builders: AB1 thus offers the prototype of what will be the finished product. Choosing to buy an AB1 Rod is transforming your technical ideas into an executive project that will be YOUR fishing rod, unique and personal because YOUR ego is YOUR passion. AB1 TACKLE builds all there products 100% in Italy.Within its own closed supply chain, it designs and builds all the necessary components: the AB1 full floating roller guide system (world wide Patented) , the AB1 curved and straight butts are in structural carbon fiber, the AB1 reel seat and, the AB1 fighting belt also in full carbon fiber.Innovative and covered by international patents, the AB1 roller guides have a joint system that accompanies the flexing of a blank, making the blank work naturally like if there were no rollers on it., working smoothly with no tension that your normal conventional rollers create when bending the blank, also giving the rod a more powerful rebound when in battle! The AB1 handle in full structural carbon fiber, being made of composite material, does not interrupt the action of the blank, the handle compliments the action of the blank and reinforces the rebound with a synthesized flex, thus giving the rod a single-barrel characteristics and also the practicality of being dismantled in two pieces. The AB1 reel seat in structural carbon fiber, built one by one layering the fabrics, does not interrupt the action of the blank at the fixing point, it flexes at the same time and increases the speed of the reaction.The AB1 structural carbon real seat, to be used with a single-stem blank, does not affect the designed action of the blank, interacts at 40° of flexion of the blank and gives a powerful thrust avoiding parabolic phenomena and power gaps. The structure of the ab1 blanks are layed out one by one. The composite materials for higher performance, for structural applications are those formed by a discontinuos phase consisting of fiber (carbon) and a continuos phase called matrix (polymer). The production technologies that provide for the combination of the matrix with fibers arranged according to the predetermined directions during the structural calculation phase, allow to make composites with mechanical properties finalized, that is: - the mechanical properties of fibers (carbon 1K 1000 microwires to build ONE) - their orientation - their length - the mechanical properties of the polymechanical matrix - the chemical properties of the matrix - the behavior of the interface between fiber and matrix (adhesion) Carbon fibers can be classified according to the precursor material used in the production phase, which can be pitch, rayon, PAN.Epoxy resins belong to the class of thermosetting resins and are prepared from low molecular weight and low viscosity agents so that they can easily engage the fibers.EPOXY RESINS are more expensive than the most common polyester or phenolic resins but, unlike these, they have a very high adhesion and better chemical resistance, as well as a high dimensional stability, a very important characteristic for a composite material.Generally carbon fibers are not used as they are but are processed with textile looms in order to obtain real fabrics (weft and warp interface).When the quantity of fibers in one direction (generally the warp) becomes predominant, UNIDIRECTIONAL FABRICS occur.These types of fabrics allow you to take full advantage of the mechanical characteristics of the fibers along precise directions.Along the other directions, fibers of different material may also be present in order to maintain the dimensional stability of the dry material without diminishing the drapeability.THE MAIN ADVANTAGE of UNIDIRECTIONAL FABRICS is the possibility of being able to POSITION the optimal quantity of fibers exactly WHERE THEIR PROPERTIES are required and are macroscopically STRAIGHT. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. AB1 TACKLE costruisce i propri componenti 100% made in Italy. All'interno di una propria filiera chiusa, progetta e costruisce tutti i componenti necessari: il passante guida filo roller AB1, il manico curvo e/o dritto, il porta mulinello ed il pedone passante tutti realizzati in carbonio strutturale AB1. Innovativi e coperti da brevetto internazionale, I roller AB1 hanno un sistema basculante che accompagna la flessione del blank nei vari punti dell'asse, evitando quindi l'insorgere di vizi meccanici che ne comprometterebbero le caratteristiche progettuali. I roller AB1 sono adatti per l'utilizzo sia del monofilo che del dyneema. Il manico AB1 in carbonio strutturale, essendo costruito in materiale composito, non interrompe l'azione del blank al bicchierino di innesto, ma prosegue fino alla crocera, conferendo così all'attrezzo le caratteristiche mono fusto e comunque la praticità di essere smontato in due pezzi. Il porta mulinello AB1 in carbonio strutturale, costruito in forma stratificando i tessuti, non interrompe l'azione del blank nel punto di fissaggio, flette e nel contempo incrementa la velocità della reazione. Il pedone passante AB1 in carbonio strutturale, da utilizzare con blank mono fusto, non pregiudica l'azione progettuale dell'attrezzo, ma interviene oltre i 40° di flessione del manico e imprime una spinta poderosa evitando fenomeni parabolici e vuoti di potenza. I materiali compositi per applicazioni strutturali, a più elevate prestazioni, sono quelli formati da una fase discontinua costituita da FIBRE (carbonio) e una fase Continua detta MATRICE (POLIMERICA). Le tecnologie di produzione che prevedono la combinazione della matrice con fibre disposte secondo direzioni predeterminate in fase di calcolo strutturale, permettono di REALIZZARE COMPOSITI CON PROPRIETA' MECCANICHE FINALIZZATE che dipendono dai componenti utilizzati per la loro produzione, ovvero : - le proprietà meccaniche delle fibre (carbonio 1K 1000 microfili per costruirne UNO) - il loro orientamento - la loro lunghezza - le proprietà meccaniche della matrice polimerica - le proprietà chimiche della matrice - il comportamento dell'interfaccia fra fibra e matrice (adesione) Le fibre di carbonio si possono classificare in base al materiale precursore utilizzato in fase di produzione, che può essere pece , rayon , PAN. Le resine epossidiche appartengono alla classe delle resine termoindurenti sono preparate a partire da reagenti a basso peso molecolare e a bassa viscosità in modo che possano facilmente impregnare le fibre. Le resine epossidiche, più costose delle commerciali resine poliesteri o fenoliche, possiedono caratteristiche uniche tra le quali un‘ elevata aderenza e una migliore resistenza chimica, oltre ad un’ elevata stabilità dimensionale, caratteristica molto importante per un materiale composito. Generalmente le fibre di carbonio non vengono utilizzate così come sono ma vengono processate con i telai tessili al fine di ottenere dei veri e propri tessuti (interfaccia di trama e ordito). Quando la quantità di fibre in una direzione (generalmente l'ordito) diventano predominanti , si hanno TESSUTI UNIDIREZIONALI. Questi tipi di tessuti permettono di sfruttare appieno LE CARATTERISTICHE MECCANICHE DELLE FIBRE LUNGO DIREZIONI PRECISE. Lungo le altre direzioni possono essere presenti anche delle fibre di materiale differente con lo scopo di mantenere la stabilità dimensionale del materiale a secco senza però diminuire la drappeggiabilità. IL PRINCIPALE VANTAGGIO dei TESSUTI UNIDIREZIONALI è la possibilità di potere POSIZIONARE la quantità ottimale di fibre esattamente DOVE LE LORO PROPRIETA' sono richieste e sono macroscopicamente DRITTE. Reel Seat full carbon fiber Fuji Sic Unidirectional structure Blank Pry acid system Each blank tested on goniometric wall Under wrap resined one by one Triple wrap resined one by one 3 hands of Ultra V finish</p><table><thead class="pestit"><tr><td>Modello</td><td>Modello</td><td>Lunghezza</td><td>Best Drag</td><td>Max Drag</td><td>Fighting Drag</td><td>Fast Limited</td></tr></thead><tbody class="pestxt"><tr><td>AB1 Moderate 1</td><td>Moderate 1</td><td>1,98 mt</td><td>3Kg / 7Lbs</td><td>5Kg / 11Lbs</td><td>Piombo 200-500gr</td><td></td></tr><tr><td>AB1 Moderate 2 </td><td>Moderate 2</td><td>1,98 mt</td><td>4Kg / 9Lbs</td><td>7Kg / 15Lbs</td><td>Piombo 400-700gr</td><td></td></tr></tbody></table>
Price €1,190.00
rating 0 review
AB1 Diabolika

AB1 Diabolika

<p>AB1 sport fishing rods are specially built for maximum performance, they are not made in bulk production, Each blank is built one by one and tested on a dyno. (geometric wall). It is a unique constructional concept and very exclusive, combined with the AB1 components. The companys philosophy out of the series of commercial dynamics provides the starting point of which each individual rod is made, dressed with sartorial quality and providing it with proven and certified mechanical specifications. AB1 designs and builds its products in a 100% closed supply chain, 100% made in Italy: blanks and components: statically tested in the laboratories and dynamically at sea with the team of experts and elite sport fishermen affiliated to the company. The decision to buy an AB1 product is like a decision to have a tailored made suit, because it dresses the passion of a sport fisherman. AB1 employs a staff of highly qualified consultants in sport fishing who listen to the customer's needs, interacting with AB1 engineers and Rod Builders: AB1 thus offers the prototype of what will be the finished product. Choosing to buy an AB1 Rod is transforming your technical ideas into an executive project that will be YOUR fishing rod, unique and personal because YOUR ego is YOUR passion. AB1 TACKLE builds all there products 100% in Italy.Within its own closed supply chain, it designs and builds all the necessary components: the AB1 full floating roller guide system (world wide Patented) , the AB1 curved and straight butts are in structural carbon fiber, the AB1 reel seat and, the AB1 fighting belt also in full carbon fiber.Innovative and covered by international patents, the AB1 roller guides have a joint system that accompanies the flexing of a blank, making the blank work naturally like if there were no rollers on it., working smoothly with no tension that your normal conventional rollers create when bending the blank, also giving the rod a more powerful rebound when in battle! The AB1 handle in full structural carbon fiber, being made of composite material, does not interrupt the action of the blank, the handle compliments the action of the blank and reinforces the rebound with a synthesized flex, thus giving the rod a single-barrel characteristics and also the practicality of being dismantled in two pieces. The AB1 reel seat in structural carbon fiber, built one by one layering the fabrics, does not interrupt the action of the blank at the fixing point, it flexes at the same time and increases the speed of the reaction.The AB1 structural carbon real seat, to be used with a single-stem blank, does not affect the designed action of the blank, interacts at 40° of flexion of the blank and gives a powerful thrust avoiding parabolic phenomena and power gaps. The structure of the ab1 blanks are layed out one by one. The composite materials for higher performance, for structural applications are those formed by a discontinuos phase consisting of fiber (carbon) and a continuos phase called matrix (polymer). The production technologies that provide for the combination of the matrix with fibers arranged according to the predetermined directions during the structural calculation phase, allow to make composites with mechanical properties finalized, that is: - the mechanical properties of fibers (carbon 1K 1000 microwires to build ONE) - their orientation - their length - the mechanical properties of the polymechanical matrix - the chemical properties of the matrix - the behavior of the interface between fiber and matrix (adhesion) Carbon fibers can be classified according to the precursor material used in the production phase, which can be pitch, rayon, PAN.Epoxy resins belong to the class of thermosetting resins and are prepared from low molecular weight and low viscosity agents so that they can easily engage the fibers.EPOXY RESINS are more expensive than the most common polyester or phenolic resins but, unlike these, they have a very high adhesion and better chemical resistance, as well as a high dimensional stability, a very important characteristic for a composite material.Generally carbon fibers are not used as they are but are processed with textile looms in order to obtain real fabrics (weft and warp interface).When the quantity of fibers in one direction (generally the warp) becomes predominant, UNIDIRECTIONAL FABRICS occur.These types of fabrics allow you to take full advantage of the mechanical characteristics of the fibers along precise directions.Along the other directions, fibers of different material may also be present in order to maintain the dimensional stability of the dry material without diminishing the drapeability.THE MAIN ADVANTAGE of UNIDIRECTIONAL FABRICS is the possibility of being able to POSITION the optimal quantity of fibers exactly WHERE THEIR PROPERTIES are required and are macroscopically STRAIGHT. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. AB1 TACKLE costruisce i propri componenti 100% made in Italy. All'interno di una propria filiera chiusa, progetta e costruisce tutti i componenti necessari: il passante guida filo roller AB1, il manico curvo e/o dritto, il porta mulinello ed il pedone passante tutti realizzati in carbonio strutturale AB1. Innovativi e coperti da brevetto internazionale, I roller AB1 hanno un sistema basculante che accompagna la flessione del blank nei vari punti dell'asse, evitando quindi l'insorgere di vizi meccanici che ne comprometterebbero le caratteristiche progettuali. I roller AB1 sono adatti per l'utilizzo sia del monofilo che del dyneema. Il manico AB1 in carbonio strutturale, essendo costruito in materiale composito, non interrompe l'azione del blank al bicchierino di innesto, ma prosegue fino alla crocera, conferendo così all'attrezzo le caratteristiche mono fusto e comunque la praticità di essere smontato in due pezzi. Il porta mulinello AB1 in carbonio strutturale, costruito in forma stratificando i tessuti, non interrompe l'azione del blank nel punto di fissaggio, flette e nel contempo incrementa la velocità della reazione. Il pedone passante AB1 in carbonio strutturale, da utilizzare con blank mono fusto, non pregiudica l'azione progettuale dell'attrezzo, ma interviene oltre i 40° di flessione del manico e imprime una spinta poderosa evitando fenomeni parabolici e vuoti di potenza. I materiali compositi per applicazioni strutturali, a più elevate prestazioni, sono quelli formati da una fase discontinua costituita da FIBRE (carbonio) e una fase Continua detta MATRICE (POLIMERICA). Le tecnologie di produzione che prevedono la combinazione della matrice con fibre disposte secondo direzioni predeterminate in fase di calcolo strutturale, permettono di REALIZZARE COMPOSITI CON PROPRIETA' MECCANICHE FINALIZZATE che dipendono dai componenti utilizzati per la loro produzione, ovvero : - le proprietà meccaniche delle fibre (carbonio 1K 1000 microfili per costruirne UNO) - il loro orientamento - la loro lunghezza - le proprietà meccaniche della matrice polimerica - le proprietà chimiche della matrice - il comportamento dell'interfaccia fra fibra e matrice (adesione) Le fibre di carbonio si possono classificare in base al materiale precursore utilizzato in fase di produzione, che può essere pece , rayon , PAN. Le resine epossidiche appartengono alla classe delle resine termoindurenti sono preparate a partire da reagenti a basso peso molecolare e a bassa viscosità in modo che possano facilmente impregnare le fibre. Le resine epossidiche, più costose delle commerciali resine poliesteri o fenoliche, possiedono caratteristiche uniche tra le quali un‘ elevata aderenza e una migliore resistenza chimica, oltre ad un’ elevata stabilità dimensionale, caratteristica molto importante per un materiale composito. Generalmente le fibre di carbonio non vengono utilizzate così come sono ma vengono processate con i telai tessili al fine di ottenere dei veri e propri tessuti (interfaccia di trama e ordito). Quando la quantità di fibre in una direzione (generalmente l'ordito) diventano predominanti , si hanno TESSUTI UNIDIREZIONALI. Questi tipi di tessuti permettono di sfruttare appieno LE CARATTERISTICHE MECCANICHE DELLE FIBRE LUNGO DIREZIONI PRECISE. Lungo le altre direzioni possono essere presenti anche delle fibre di materiale differente con lo scopo di mantenere la stabilità dimensionale del materiale a secco senza però diminuire la drappeggiabilità. IL PRINCIPALE VANTAGGIO dei TESSUTI UNIDIREZIONALI è la possibilità di potere POSIZIONARE la quantità ottimale di fibre esattamente DOVE LE LORO PROPRIETA' sono richieste e sono macroscopicamente DRITTE. Reel Seat full carbon fiber Fuji Sic Unidirectional structure Blank Pry acid system Each blank tested on goniometric wall Under wrap resined one by one Triple wrap resined one by one 3 hands of Ultra V finish</p><table><thead class="pestit"><tr><td>Modello</td><td>Modello</td><td>Lunghezza</td><td>Best Drag</td><td>Max Drag</td><td>Fighting Drag</td><td>Fast Limited</td></tr></thead><tbody class="pestxt"><tr><td>AB1 Diabolika 1</td><td>Diabolika 1</td><td>1,98 mt</td><td>5Kg / 11Lbs</td><td>9Kg / 20Lbs</td><td>Piombo 350-750gr</td><td></td></tr><tr><td>AB1 Diabolika 2</td><td>Diabolika 2</td><td>2,03 mt</td><td>5Kg / 11Lbs</td><td>9Kg / 20Lbs</td><td>Piombo 400-800gr</td><td></td></tr></tbody></table>
Price €1,190.00
rating 0 review
AB1 Speedy

AB1 Speedy

<p>AB1 sport fishing rods are specially built for maximum performance, they are not made in bulk production, Each blank is built one by one and tested on a dyno. (geometric wall). It is a unique constructional concept and very exclusive, combined with the AB1 components. The companys philosophy out of the series of commercial dynamics provides the starting point of which each individual rod is made, dressed with sartorial quality and providing it with proven and certified mechanical specifications. AB1 designs and builds its products in a 100% closed supply chain, 100% made in Italy: blanks and components: statically tested in the laboratories and dynamically at sea with the team of experts and elite sport fishermen affiliated to the company. The decision to buy an AB1 product is like a decision to have a tailored made suit, because it dresses the passion of a sport fisherman. AB1 employs a staff of highly qualified consultants in sport fishing who listen to the customer's needs, interacting with AB1 engineers and Rod Builders: AB1 thus offers the prototype of what will be the finished product. Choosing to buy an AB1 Rod is transforming your technical ideas into an executive project that will be YOUR fishing rod, unique and personal because YOUR ego is YOUR passion. AB1 TACKLE builds all there products 100% in Italy.Within its own closed supply chain, it designs and builds all the necessary components: the AB1 full floating roller guide system (world wide Patented) , the AB1 curved and straight butts are in structural carbon fiber, the AB1 reel seat and, the AB1 fighting belt also in full carbon fiber.Innovative and covered by international patents, the AB1 roller guides have a joint system that accompanies the flexing of a blank, making the blank work naturally like if there were no rollers on it., working smoothly with no tension that your normal conventional rollers create when bending the blank, also giving the rod a more powerful rebound when in battle! The AB1 handle in full structural carbon fiber, being made of composite material, does not interrupt the action of the blank, the handle compliments the action of the blank and reinforces the rebound with a synthesized flex, thus giving the rod a single-barrel characteristics and also the practicality of being dismantled in two pieces. The AB1 reel seat in structural carbon fiber, built one by one layering the fabrics, does not interrupt the action of the blank at the fixing point, it flexes at the same time and increases the speed of the reaction.The AB1 structural carbon real seat, to be used with a single-stem blank, does not affect the designed action of the blank, interacts at 40° of flexion of the blank and gives a powerful thrust avoiding parabolic phenomena and power gaps. The structure of the ab1 blanks are layed out one by one. The composite materials for higher performance, for structural applications are those formed by a discontinuos phase consisting of fiber (carbon) and a continuos phase called matrix (polymer). The production technologies that provide for the combination of the matrix with fibers arranged according to the predetermined directions during the structural calculation phase, allow to make composites with mechanical properties finalized, that is: - the mechanical properties of fibers (carbon 1K 1000 microwires to build ONE) - their orientation - their length - the mechanical properties of the polymechanical matrix - the chemical properties of the matrix - the behavior of the interface between fiber and matrix (adhesion) Carbon fibers can be classified according to the precursor material used in the production phase, which can be pitch, rayon, PAN.Epoxy resins belong to the class of thermosetting resins and are prepared from low molecular weight and low viscosity agents so that they can easily engage the fibers.EPOXY RESINS are more expensive than the most common polyester or phenolic resins but, unlike these, they have a very high adhesion and better chemical resistance, as well as a high dimensional stability, a very important characteristic for a composite material.Generally carbon fibers are not used as they are but are processed with textile looms in order to obtain real fabrics (weft and warp interface).When the quantity of fibers in one direction (generally the warp) becomes predominant, UNIDIRECTIONAL FABRICS occur.These types of fabrics allow you to take full advantage of the mechanical characteristics of the fibers along precise directions.Along the other directions, fibers of different material may also be present in order to maintain the dimensional stability of the dry material without diminishing the drapeability.THE MAIN ADVANTAGE of UNIDIRECTIONAL FABRICS is the possibility of being able to POSITION the optimal quantity of fibers exactly WHERE THEIR PROPERTIES are required and are macroscopically STRAIGHT. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. AB1 TACKLE costruisce i propri componenti 100% made in Italy. All'interno di una propria filiera chiusa, progetta e costruisce tutti i componenti necessari: il passante guida filo roller AB1, il manico curvo e/o dritto, il porta mulinello ed il pedone passante tutti realizzati in carbonio strutturale AB1. Innovativi e coperti da brevetto internazionale, I roller AB1 hanno un sistema basculante che accompagna la flessione del blank nei vari punti dell'asse, evitando quindi l'insorgere di vizi meccanici che ne comprometterebbero le caratteristiche progettuali. I roller AB1 sono adatti per l'utilizzo sia del monofilo che del dyneema. Il manico AB1 in carbonio strutturale, essendo costruito in materiale composito, non interrompe l'azione del blank al bicchierino di innesto, ma prosegue fino alla crocera, conferendo così all'attrezzo le caratteristiche mono fusto e comunque la praticità di essere smontato in due pezzi. Il porta mulinello AB1 in carbonio strutturale, costruito in forma stratificando i tessuti, non interrompe l'azione del blank nel punto di fissaggio, flette e nel contempo incrementa la velocità della reazione. Il pedone passante AB1 in carbonio strutturale, da utilizzare con blank mono fusto, non pregiudica l'azione progettuale dell'attrezzo, ma interviene oltre i 40° di flessione del manico e imprime una spinta poderosa evitando fenomeni parabolici e vuoti di potenza. I materiali compositi per applicazioni strutturali, a più elevate prestazioni, sono quelli formati da una fase discontinua costituita da FIBRE (carbonio) e una fase Continua detta MATRICE (POLIMERICA). Le tecnologie di produzione che prevedono la combinazione della matrice con fibre disposte secondo direzioni predeterminate in fase di calcolo strutturale, permettono di REALIZZARE COMPOSITI CON PROPRIETA' MECCANICHE FINALIZZATE che dipendono dai componenti utilizzati per la loro produzione, ovvero : - le proprietà meccaniche delle fibre (carbonio 1K 1000 microfili per costruirne UNO) - il loro orientamento - la loro lunghezza - le proprietà meccaniche della matrice polimerica - le proprietà chimiche della matrice - il comportamento dell'interfaccia fra fibra e matrice (adesione) Le fibre di carbonio si possono classificare in base al materiale precursore utilizzato in fase di produzione, che può essere pece , rayon , PAN. Le resine epossidiche appartengono alla classe delle resine termoindurenti sono preparate a partire da reagenti a basso peso molecolare e a bassa viscosità in modo che possano facilmente impregnare le fibre. Le resine epossidiche, più costose delle commerciali resine poliesteri o fenoliche, possiedono caratteristiche uniche tra le quali un‘ elevata aderenza e una migliore resistenza chimica, oltre ad un’ elevata stabilità dimensionale, caratteristica molto importante per un materiale composito. Generalmente le fibre di carbonio non vengono utilizzate così come sono ma vengono processate con i telai tessili al fine di ottenere dei veri e propri tessuti (interfaccia di trama e ordito). Quando la quantità di fibre in una direzione (generalmente l'ordito) diventano predominanti , si hanno TESSUTI UNIDIREZIONALI. Questi tipi di tessuti permettono di sfruttare appieno LE CARATTERISTICHE MECCANICHE DELLE FIBRE LUNGO DIREZIONI PRECISE. Lungo le altre direzioni possono essere presenti anche delle fibre di materiale differente con lo scopo di mantenere la stabilità dimensionale del materiale a secco senza però diminuire la drappeggiabilità. IL PRINCIPALE VANTAGGIO dei TESSUTI UNIDIREZIONALI è la possibilità di potere POSIZIONARE la quantità ottimale di fibre esattamente DOVE LE LORO PROPRIETA' sono richieste e sono macroscopicamente DRITTE. Reel Seat full carbon fiber Fuji Sic Unidirectional structure Blank Pry acid system Each blank tested on goniometric wall Under wrap resined one by one Triple wrap resined one by one 3 hands of Ultra V finish</p><table><thead class="pestit"><tr><td>Modello</td><td>Modello</td><td>Lunghezza</td><td>Best Drag</td><td>Max Drag</td><td>Fighting Drag</td><td>Fast Limited</td></tr></thead><tbody class="pestxt"><tr><td>AB1 Speedy 1</td><td>Speedy 1</td><td>1,98 mt</td><td>4Kg / 9Lbs</td><td>8Kg / 18Lbs</td><td>Piombo 500-800gr</td><td></td></tr><tr><td>AB1 Speedy 2</td><td>Speedy 2</td><td>1,98 mt</td><td>6Kg / 14Lbs</td><td>10Kg / 23Lbs</td><td>Piombo 600-1000gr</td><td></td></tr></tbody></table>
Price €1,210.00
rating 0 review
AB1 Off Shore Trolling AB1 Off Shore Trolling

AB1 Off Shore Trolling

<p>AB1 sport fishing rods are specially built for maximum performance, they are not made in bulk production, Each blank is built one by one and tested on a dyno. (geometric wall). It is a unique constructional concept and very exclusive, combined with the AB1 components. The companys philosophy out of the series of commercial dynamics provides the starting point of which each individual rod is made, dressed with sartorial quality and providing it with proven and certified mechanical specifications. AB1 designs and builds its products in a 100% closed supply chain, 100% made in Italy: blanks and components: statically tested in the laboratories and dynamically at sea with the team of experts and elite sport fishermen affiliated to the company. The decision to buy an AB1 product is like a decision to have a tailored made suit, because it dresses the passion of a sport fisherman. AB1 employs a staff of highly qualified consultants in sport fishing who listen to the customer's needs, interacting with AB1 engineers and Rod Builders: AB1 thus offers the prototype of what will be the finished product. Choosing to buy an AB1 Rod is transforming your technical ideas into an executive project that will be YOUR fishing rod, unique and personal because YOUR ego is YOUR passion. AB1 TACKLE builds all there products 100% in Italy.Within its own closed supply chain, it designs and builds all the necessary components: the AB1 full floating roller guide system (world wide Patented) , the AB1 curved and straight butts are in structural carbon fiber, the AB1 reel seat and, the AB1 fighting belt also in full carbon fiber.Innovative and covered by international patents, the AB1 roller guides have a joint system that accompanies the flexing of a blank, making the blank work naturally like if there were no rollers on it., working smoothly with no tension that your normal conventional rollers create when bending the blank, also giving the rod a more powerful rebound when in battle! The AB1 handle in full structural carbon fiber, being made of composite material, does not interrupt the action of the blank, the handle compliments the action of the blank and reinforces the rebound with a synthesized flex, thus giving the rod a single-barrel characteristics and also the practicality of being dismantled in two pieces. The AB1 reel seat in structural carbon fiber, built one by one layering the fabrics, does not interrupt the action of the blank at the fixing point, it flexes at the same time and increases the speed of the reaction.The AB1 structural carbon real seat, to be used with a single-stem blank, does not affect the designed action of the blank, interacts at 40° of flexion of the blank and gives a powerful thrust avoiding parabolic phenomena and power gaps. The structure of the ab1 blanks are layed out one by one. The composite materials for higher performance, for structural applications are those formed by a discontinuos phase consisting of fiber (carbon) and a continuos phase called matrix (polymer). The production technologies that provide for the combination of the matrix with fibers arranged according to the predetermined directions during the structural calculation phase, allow to make composites with mechanical properties finalized, that is: - the mechanical properties of fibers (carbon 1K 1000 microwires to build ONE) - their orientation - their length - the mechanical properties of the polymechanical matrix - the chemical properties of the matrix - the behavior of the interface between fiber and matrix (adhesion) Carbon fibers can be classified according to the precursor material used in the production phase, which can be pitch, rayon, PAN.Epoxy resins belong to the class of thermosetting resins and are prepared from low molecular weight and low viscosity agents so that they can easily engage the fibers.EPOXY RESINS are more expensive than the most common polyester or phenolic resins but, unlike these, they have a very high adhesion and better chemical resistance, as well as a high dimensional stability, a very important characteristic for a composite material.Generally carbon fibers are not used as they are but are processed with textile looms in order to obtain real fabrics (weft and warp interface).When the quantity of fibers in one direction (generally the warp) becomes predominant, UNIDIRECTIONAL FABRICS occur.These types of fabrics allow you to take full advantage of the mechanical characteristics of the fibers along precise directions.Along the other directions, fibers of different material may also be present in order to maintain the dimensional stability of the dry material without diminishing the drapeability.THE MAIN ADVANTAGE of UNIDIRECTIONAL FABRICS is the possibility of being able to POSITION the optimal quantity of fibers exactly WHERE THEIR PROPERTIES are required and are macroscopically STRAIGHT. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. AB1 TACKLE costruisce i propri componenti 100% made in Italy. All'interno di una propria filiera chiusa, progetta e costruisce tutti i componenti necessari: il passante guida filo roller AB1, il manico curvo e/o dritto, il porta mulinello ed il pedone passante tutti realizzati in carbonio strutturale AB1. Innovativi e coperti da brevetto internazionale, I roller AB1 hanno un sistema basculante che accompagna la flessione del blank nei vari punti dell'asse, evitando quindi l'insorgere di vizi meccanici che ne comprometterebbero le caratteristiche progettuali. I roller AB1 sono adatti per l'utilizzo sia del monofilo che del dyneema. Il manico AB1 in carbonio strutturale, essendo costruito in materiale composito, non interrompe l'azione del blank al bicchierino di innesto, ma prosegue fino alla crocera, conferendo così all'attrezzo le caratteristiche mono fusto e comunque la praticità di essere smontato in due pezzi. Il porta mulinello AB1 in carbonio strutturale, costruito in forma stratificando i tessuti, non interrompe l'azione del blank nel punto di fissaggio, flette e nel contempo incrementa la velocità della reazione. Il pedone passante AB1 in carbonio strutturale, da utilizzare con blank mono fusto, non pregiudica l'azione progettuale dell'attrezzo, ma interviene oltre i 40° di flessione del manico e imprime una spinta poderosa evitando fenomeni parabolici e vuoti di potenza. I materiali compositi per applicazioni strutturali, a più elevate prestazioni, sono quelli formati da una fase discontinua costituita da FIBRE (carbonio) e una fase Continua detta MATRICE (POLIMERICA). Le tecnologie di produzione che prevedono la combinazione della matrice con fibre disposte secondo direzioni predeterminate in fase di calcolo strutturale, permettono di REALIZZARE COMPOSITI CON PROPRIETA' MECCANICHE FINALIZZATE che dipendono dai componenti utilizzati per la loro produzione, ovvero : - le proprietà meccaniche delle fibre (carbonio 1K 1000 microfili per costruirne UNO) - il loro orientamento - la loro lunghezza - le proprietà meccaniche della matrice polimerica - le proprietà chimiche della matrice - il comportamento dell'interfaccia fra fibra e matrice (adesione) Le fibre di carbonio si possono classificare in base al materiale precursore utilizzato in fase di produzione, che può essere pece , rayon , PAN. Le resine epossidiche appartengono alla classe delle resine termoindurenti sono preparate a partire da reagenti a basso peso molecolare e a bassa viscosità in modo che possano facilmente impregnare le fibre. Le resine epossidiche, più costose delle commerciali resine poliesteri o fenoliche, possiedono caratteristiche uniche tra le quali un‘ elevata aderenza e una migliore resistenza chimica, oltre ad un’ elevata stabilità dimensionale, caratteristica molto importante per un materiale composito. Generalmente le fibre di carbonio non vengono utilizzate così come sono ma vengono processate con i telai tessili al fine di ottenere dei veri e propri tessuti (interfaccia di trama e ordito). Quando la quantità di fibre in una direzione (generalmente l'ordito) diventano predominanti , si hanno TESSUTI UNIDIREZIONALI. Questi tipi di tessuti permettono di sfruttare appieno LE CARATTERISTICHE MECCANICHE DELLE FIBRE LUNGO DIREZIONI PRECISE. Lungo le altre direzioni possono essere presenti anche delle fibre di materiale differente con lo scopo di mantenere la stabilità dimensionale del materiale a secco senza però diminuire la drappeggiabilità. IL PRINCIPALE VANTAGGIO dei TESSUTI UNIDIREZIONALI è la possibilità di potere POSIZIONARE la quantità ottimale di fibre esattamente DOVE LE LORO PROPRIETA' sono richieste e sono macroscopicamente DRITTE. Reel Seat full carbon fiber Fuji Sic Unidirectional structure Blank Pry acid system Each blank tested on goniometric wall Under wrap resined one by one Triple wrap resined one by one 3 hands of Ultra V finish</p><table><thead class="pestit"><tr><td>Modello</td><td>Modello</td><td>Lunghezza</td><td>Best Drag</td><td>Max Drag</td><td>Fighting Drag</td><td>Fast Limited</td></tr></thead><tbody class="pestxt"><tr><td>AB1 Off Shore Trolling 1</td><td>Trolling 1</td><td>1,80 mt</td><td>4Kg / 9Lbs</td><td>8Kg / 18Lbs</td><td>3 - 7 KG / 7 – 16 LBS</td><td></td></tr><tr><td>AB1 Off Shore Trolling 2</td><td>Trolling 2</td><td>1,80 mt</td><td>5 KG / 11 LBS</td><td>10 KG / 22 LBS</td><td>4-8 KG / 9-18 LBS</td><td></td></tr><tr><td>AB1 Off Shore Trolling 3</td><td>Trolling 3</td><td>1,80 mt</td><td>7 KG / 15 LBS</td><td>13 KG / 29 LBS</td><td>5-10 KG / 11-22 LBS</td><td></td></tr></tbody></table>
Price €1,310.00
rating 0 review
AB1 MARBLE Prime Trolling AB1 MARBLE Prime Trolling

AB1 MARBLE Prime Trolling

<p>AB1 sport fishing rods are specially built for maximum performance, they are not made in bulk production, Each blank is built one by one and tested on a dyno. (geometric wall). It is a unique constructional concept and very exclusive, combined with the AB1 components. The companys philosophy out of the series of commercial dynamics provides the starting point of which each individual rod is made, dressed with sartorial quality and providing it with proven and certified mechanical specifications. AB1 designs and builds its products in a 100% closed supply chain, 100% made in Italy: blanks and components: statically tested in the laboratories and dynamically at sea with the team of experts and elite sport fishermen affiliated to the company. The decision to buy an AB1 product is like a decision to have a tailored made suit, because it dresses the passion of a sport fisherman. AB1 employs a staff of highly qualified consultants in sport fishing who listen to the customer's needs, interacting with AB1 engineers and Rod Builders: AB1 thus offers the prototype of what will be the finished product. Choosing to buy an AB1 Rod is transforming your technical ideas into an executive project that will be YOUR fishing rod, unique and personal because YOUR ego is YOUR passion. AB1 TACKLE builds all there products 100% in Italy.Within its own closed supply chain, it designs and builds all the necessary components: the AB1 full floating roller guide system (world wide Patented) , the AB1 curved and straight butts are in structural carbon fiber, the AB1 reel seat and, the AB1 fighting belt also in full carbon fiber.Innovative and covered by international patents, the AB1 roller guides have a joint system that accompanies the flexing of a blank, making the blank work naturally like if there were no rollers on it., working smoothly with no tension that your normal conventional rollers create when bending the blank, also giving the rod a more powerful rebound when in battle! The AB1 handle in full structural carbon fiber, being made of composite material, does not interrupt the action of the blank, the handle compliments the action of the blank and reinforces the rebound with a synthesized flex, thus giving the rod a single-barrel characteristics and also the practicality of being dismantled in two pieces. The AB1 reel seat in structural carbon fiber, built one by one layering the fabrics, does not interrupt the action of the blank at the fixing point, it flexes at the same time and increases the speed of the reaction.The AB1 structural carbon real seat, to be used with a single-stem blank, does not affect the designed action of the blank, interacts at 40° of flexion of the blank and gives a powerful thrust avoiding parabolic phenomena and power gaps. The structure of the ab1 blanks are layed out one by one. The composite materials for higher performance, for structural applications are those formed by a discontinuos phase consisting of fiber (carbon) and a continuos phase called matrix (polymer). The production technologies that provide for the combination of the matrix with fibers arranged according to the predetermined directions during the structural calculation phase, allow to make composites with mechanical properties finalized, that is: - the mechanical properties of fibers (carbon 1K 1000 microwires to build ONE) - their orientation - their length - the mechanical properties of the polymechanical matrix - the chemical properties of the matrix - the behavior of the interface between fiber and matrix (adhesion) Carbon fibers can be classified according to the precursor material used in the production phase, which can be pitch, rayon, PAN.Epoxy resins belong to the class of thermosetting resins and are prepared from low molecular weight and low viscosity agents so that they can easily engage the fibers.EPOXY RESINS are more expensive than the most common polyester or phenolic resins but, unlike these, they have a very high adhesion and better chemical resistance, as well as a high dimensional stability, a very important characteristic for a composite material.Generally carbon fibers are not used as they are but are processed with textile looms in order to obtain real fabrics (weft and warp interface).When the quantity of fibers in one direction (generally the warp) becomes predominant, UNIDIRECTIONAL FABRICS occur.These types of fabrics allow you to take full advantage of the mechanical characteristics of the fibers along precise directions.Along the other directions, fibers of different material may also be present in order to maintain the dimensional stability of the dry material without diminishing the drapeability.THE MAIN ADVANTAGE of UNIDIRECTIONAL FABRICS is the possibility of being able to POSITION the optimal quantity of fibers exactly WHERE THEIR PROPERTIES are required and are macroscopically STRAIGHT. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. AB1 TACKLE costruisce i propri componenti 100% made in Italy. All'interno di una propria filiera chiusa, progetta e costruisce tutti i componenti necessari: il passante guida filo roller AB1, il manico curvo e/o dritto, il porta mulinello ed il pedone passante tutti realizzati in carbonio strutturale AB1. Innovativi e coperti da brevetto internazionale, I roller AB1 hanno un sistema basculante che accompagna la flessione del blank nei vari punti dell'asse, evitando quindi l'insorgere di vizi meccanici che ne comprometterebbero le caratteristiche progettuali. I roller AB1 sono adatti per l'utilizzo sia del monofilo che del dyneema. Il manico AB1 in carbonio strutturale, essendo costruito in materiale composito, non interrompe l'azione del blank al bicchierino di innesto, ma prosegue fino alla crocera, conferendo così all'attrezzo le caratteristiche mono fusto e comunque la praticità di essere smontato in due pezzi. Il porta mulinello AB1 in carbonio strutturale, costruito in forma stratificando i tessuti, non interrompe l'azione del blank nel punto di fissaggio, flette e nel contempo incrementa la velocità della reazione. Il pedone passante AB1 in carbonio strutturale, da utilizzare con blank mono fusto, non pregiudica l'azione progettuale dell'attrezzo, ma interviene oltre i 40° di flessione del manico e imprime una spinta poderosa evitando fenomeni parabolici e vuoti di potenza. I materiali compositi per applicazioni strutturali, a più elevate prestazioni, sono quelli formati da una fase discontinua costituita da FIBRE (carbonio) e una fase Continua detta MATRICE (POLIMERICA). Le tecnologie di produzione che prevedono la combinazione della matrice con fibre disposte secondo direzioni predeterminate in fase di calcolo strutturale, permettono di REALIZZARE COMPOSITI CON PROPRIETA' MECCANICHE FINALIZZATE che dipendono dai componenti utilizzati per la loro produzione, ovvero : - le proprietà meccaniche delle fibre (carbonio 1K 1000 microfili per costruirne UNO) - il loro orientamento - la loro lunghezza - le proprietà meccaniche della matrice polimerica - le proprietà chimiche della matrice - il comportamento dell'interfaccia fra fibra e matrice (adesione) Le fibre di carbonio si possono classificare in base al materiale precursore utilizzato in fase di produzione, che può essere pece , rayon , PAN. Le resine epossidiche appartengono alla classe delle resine termoindurenti sono preparate a partire da reagenti a basso peso molecolare e a bassa viscosità in modo che possano facilmente impregnare le fibre. Le resine epossidiche, più costose delle commerciali resine poliesteri o fenoliche, possiedono caratteristiche uniche tra le quali un‘ elevata aderenza e una migliore resistenza chimica, oltre ad un’ elevata stabilità dimensionale, caratteristica molto importante per un materiale composito. Generalmente le fibre di carbonio non vengono utilizzate così come sono ma vengono processate con i telai tessili al fine di ottenere dei veri e propri tessuti (interfaccia di trama e ordito). Quando la quantità di fibre in una direzione (generalmente l'ordito) diventano predominanti , si hanno TESSUTI UNIDIREZIONALI. Questi tipi di tessuti permettono di sfruttare appieno LE CARATTERISTICHE MECCANICHE DELLE FIBRE LUNGO DIREZIONI PRECISE. Lungo le altre direzioni possono essere presenti anche delle fibre di materiale differente con lo scopo di mantenere la stabilità dimensionale del materiale a secco senza però diminuire la drappeggiabilità. IL PRINCIPALE VANTAGGIO dei TESSUTI UNIDIREZIONALI è la possibilità di potere POSIZIONARE la quantità ottimale di fibre esattamente DOVE LE LORO PROPRIETA' sono richieste e sono macroscopicamente DRITTE. Reel Seat full carbon fiber Fuji Sic Unidirectional structure Blank Pry acid system Each blank tested on goniometric wall Under wrap resined one by one Triple wrap resined one by one 3 hands of Ultra V finish</p><table><thead class="pestit"><tr><td>Modello</td><td>Modello</td><td>Lunghezza</td><td>Best Drag</td><td>Max Drag</td><td>Fighting Drag</td><td>Fast Limited</td></tr></thead><tbody class="pestxt"><tr><td>AB1 MARBLE Prime Trolling</td><td>Prime Trolling</td><td>1.98 MT / 6</td><td>3.5 KG / 7.7 LBS</td><td>6 KG / 13 LBS</td><td></td><td></td></tr></tbody></table>
Price €690.00
rating 0 review
AB1 MARBLE Prime Acid Tuna Curved Butt AB1 MARBLE Prime Acid Tuna Curved Butt

AB1 MARBLE Prime Acid Tuna Curved Butt

<p>AB1 sport fishing rods are specially built for maximum performance, they are not made in bulk production, Each blank is built one by one and tested on a dyno. (geometric wall). It is a unique constructional concept and very exclusive, combined with the AB1 components. The companys philosophy out of the series of commercial dynamics provides the starting point of which each individual rod is made, dressed with sartorial quality and providing it with proven and certified mechanical specifications. AB1 designs and builds its products in a 100% closed supply chain, 100% made in Italy: blanks and components: statically tested in the laboratories and dynamically at sea with the team of experts and elite sport fishermen affiliated to the company. The decision to buy an AB1 product is like a decision to have a tailored made suit, because it dresses the passion of a sport fisherman. AB1 employs a staff of highly qualified consultants in sport fishing who listen to the customer's needs, interacting with AB1 engineers and Rod Builders: AB1 thus offers the prototype of what will be the finished product. Choosing to buy an AB1 Rod is transforming your technical ideas into an executive project that will be YOUR fishing rod, unique and personal because YOUR ego is YOUR passion. AB1 TACKLE builds all there products 100% in Italy.Within its own closed supply chain, it designs and builds all the necessary components: the AB1 full floating roller guide system (world wide Patented) , the AB1 curved and straight butts are in structural carbon fiber, the AB1 reel seat and, the AB1 fighting belt also in full carbon fiber.Innovative and covered by international patents, the AB1 roller guides have a joint system that accompanies the flexing of a blank, making the blank work naturally like if there were no rollers on it., working smoothly with no tension that your normal conventional rollers create when bending the blank, also giving the rod a more powerful rebound when in battle! The AB1 handle in full structural carbon fiber, being made of composite material, does not interrupt the action of the blank, the handle compliments the action of the blank and reinforces the rebound with a synthesized flex, thus giving the rod a single-barrel characteristics and also the practicality of being dismantled in two pieces. The AB1 reel seat in structural carbon fiber, built one by one layering the fabrics, does not interrupt the action of the blank at the fixing point, it flexes at the same time and increases the speed of the reaction.The AB1 structural carbon real seat, to be used with a single-stem blank, does not affect the designed action of the blank, interacts at 40° of flexion of the blank and gives a powerful thrust avoiding parabolic phenomena and power gaps. The structure of the ab1 blanks are layed out one by one. The composite materials for higher performance, for structural applications are those formed by a discontinuos phase consisting of fiber (carbon) and a continuos phase called matrix (polymer). The production technologies that provide for the combination of the matrix with fibers arranged according to the predetermined directions during the structural calculation phase, allow to make composites with mechanical properties finalized, that is: - the mechanical properties of fibers (carbon 1K 1000 microwires to build ONE) - their orientation - their length - the mechanical properties of the polymechanical matrix - the chemical properties of the matrix - the behavior of the interface between fiber and matrix (adhesion) Carbon fibers can be classified according to the precursor material used in the production phase, which can be pitch, rayon, PAN.Epoxy resins belong to the class of thermosetting resins and are prepared from low molecular weight and low viscosity agents so that they can easily engage the fibers.EPOXY RESINS are more expensive than the most common polyester or phenolic resins but, unlike these, they have a very high adhesion and better chemical resistance, as well as a high dimensional stability, a very important characteristic for a composite material.Generally carbon fibers are not used as they are but are processed with textile looms in order to obtain real fabrics (weft and warp interface).When the quantity of fibers in one direction (generally the warp) becomes predominant, UNIDIRECTIONAL FABRICS occur.These types of fabrics allow you to take full advantage of the mechanical characteristics of the fibers along precise directions.Along the other directions, fibers of different material may also be present in order to maintain the dimensional stability of the dry material without diminishing the drapeability.THE MAIN ADVANTAGE of UNIDIRECTIONAL FABRICS is the possibility of being able to POSITION the optimal quantity of fibers exactly WHERE THEIR PROPERTIES are required and are macroscopically STRAIGHT. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. AB1 TACKLE costruisce i propri componenti 100% made in Italy. All'interno di una propria filiera chiusa, progetta e costruisce tutti i componenti necessari: il passante guida filo roller AB1, il manico curvo e/o dritto, il porta mulinello ed il pedone passante tutti realizzati in carbonio strutturale AB1. Innovativi e coperti da brevetto internazionale, I roller AB1 hanno un sistema basculante che accompagna la flessione del blank nei vari punti dell'asse, evitando quindi l'insorgere di vizi meccanici che ne comprometterebbero le caratteristiche progettuali. I roller AB1 sono adatti per l'utilizzo sia del monofilo che del dyneema. Il manico AB1 in carbonio strutturale, essendo costruito in materiale composito, non interrompe l'azione del blank al bicchierino di innesto, ma prosegue fino alla crocera, conferendo così all'attrezzo le caratteristiche mono fusto e comunque la praticità di essere smontato in due pezzi. Il porta mulinello AB1 in carbonio strutturale, costruito in forma stratificando i tessuti, non interrompe l'azione del blank nel punto di fissaggio, flette e nel contempo incrementa la velocità della reazione. Il pedone passante AB1 in carbonio strutturale, da utilizzare con blank mono fusto, non pregiudica l'azione progettuale dell'attrezzo, ma interviene oltre i 40° di flessione del manico e imprime una spinta poderosa evitando fenomeni parabolici e vuoti di potenza. I materiali compositi per applicazioni strutturali, a più elevate prestazioni, sono quelli formati da una fase discontinua costituita da FIBRE (carbonio) e una fase Continua detta MATRICE (POLIMERICA). Le tecnologie di produzione che prevedono la combinazione della matrice con fibre disposte secondo direzioni predeterminate in fase di calcolo strutturale, permettono di REALIZZARE COMPOSITI CON PROPRIETA' MECCANICHE FINALIZZATE che dipendono dai componenti utilizzati per la loro produzione, ovvero : - le proprietà meccaniche delle fibre (carbonio 1K 1000 microfili per costruirne UNO) - il loro orientamento - la loro lunghezza - le proprietà meccaniche della matrice polimerica - le proprietà chimiche della matrice - il comportamento dell'interfaccia fra fibra e matrice (adesione) Le fibre di carbonio si possono classificare in base al materiale precursore utilizzato in fase di produzione, che può essere pece , rayon , PAN. Le resine epossidiche appartengono alla classe delle resine termoindurenti sono preparate a partire da reagenti a basso peso molecolare e a bassa viscosità in modo che possano facilmente impregnare le fibre. Le resine epossidiche, più costose delle commerciali resine poliesteri o fenoliche, possiedono caratteristiche uniche tra le quali un‘ elevata aderenza e una migliore resistenza chimica, oltre ad un’ elevata stabilità dimensionale, caratteristica molto importante per un materiale composito. Generalmente le fibre di carbonio non vengono utilizzate così come sono ma vengono processate con i telai tessili al fine di ottenere dei veri e propri tessuti (interfaccia di trama e ordito). Quando la quantità di fibre in una direzione (generalmente l'ordito) diventano predominanti , si hanno TESSUTI UNIDIREZIONALI. Questi tipi di tessuti permettono di sfruttare appieno LE CARATTERISTICHE MECCANICHE DELLE FIBRE LUNGO DIREZIONI PRECISE. Lungo le altre direzioni possono essere presenti anche delle fibre di materiale differente con lo scopo di mantenere la stabilità dimensionale del materiale a secco senza però diminuire la drappeggiabilità. IL PRINCIPALE VANTAGGIO dei TESSUTI UNIDIREZIONALI è la possibilità di potere POSIZIONARE la quantità ottimale di fibre esattamente DOVE LE LORO PROPRIETA' sono richieste e sono macroscopicamente DRITTE. Reel Seat full carbon fiber Fuji Sic Unidirectional structure Blank Pry acid system Each blank tested on goniometric wall Under wrap resined one by one Triple wrap resined one by one 3 hands of Ultra V finish</p><table><thead class="pestit"><tr><td>Modello</td><td>Modello</td><td>Lunghezza</td><td>Best Drag</td><td>Max Drag</td><td>Fighting Drag</td><td>Fast Limited</td></tr></thead><tbody class="pestxt"><tr><td>AB1 MARBLE Prime Acid Tuna Curved Butt</td><td>Prime Acid Tuna Curved Butt</td><td>1.83 MT / 6'</td><td>8 KG / 18 LBS</td><td>14 KG / 31 LBS </td><td></td><td></td></tr></tbody></table>
Price €950.00
rating 0 review
AB1 MARBLE Prime Roller AB1 MARBLE Prime Roller

AB1 MARBLE Prime Roller

<p>AB1 sport fishing rods are specially built for maximum performance, they are not made in bulk production, Each blank is built one by one and tested on a dyno. (geometric wall). It is a unique constructional concept and very exclusive, combined with the AB1 components. The companys philosophy out of the series of commercial dynamics provides the starting point of which each individual rod is made, dressed with sartorial quality and providing it with proven and certified mechanical specifications. AB1 designs and builds its products in a 100% closed supply chain, 100% made in Italy: blanks and components: statically tested in the laboratories and dynamically at sea with the team of experts and elite sport fishermen affiliated to the company. The decision to buy an AB1 product is like a decision to have a tailored made suit, because it dresses the passion of a sport fisherman. AB1 employs a staff of highly qualified consultants in sport fishing who listen to the customer's needs, interacting with AB1 engineers and Rod Builders: AB1 thus offers the prototype of what will be the finished product. Choosing to buy an AB1 Rod is transforming your technical ideas into an executive project that will be YOUR fishing rod, unique and personal because YOUR ego is YOUR passion. AB1 TACKLE builds all there products 100% in Italy.Within its own closed supply chain, it designs and builds all the necessary components: the AB1 full floating roller guide system (world wide Patented) , the AB1 curved and straight butts are in structural carbon fiber, the AB1 reel seat and, the AB1 fighting belt also in full carbon fiber.Innovative and covered by international patents, the AB1 roller guides have a joint system that accompanies the flexing of a blank, making the blank work naturally like if there were no rollers on it., working smoothly with no tension that your normal conventional rollers create when bending the blank, also giving the rod a more powerful rebound when in battle! The AB1 handle in full structural carbon fiber, being made of composite material, does not interrupt the action of the blank, the handle compliments the action of the blank and reinforces the rebound with a synthesized flex, thus giving the rod a single-barrel characteristics and also the practicality of being dismantled in two pieces. The AB1 reel seat in structural carbon fiber, built one by one layering the fabrics, does not interrupt the action of the blank at the fixing point, it flexes at the same time and increases the speed of the reaction.The AB1 structural carbon real seat, to be used with a single-stem blank, does not affect the designed action of the blank, interacts at 40° of flexion of the blank and gives a powerful thrust avoiding parabolic phenomena and power gaps. The structure of the ab1 blanks are layed out one by one. The composite materials for higher performance, for structural applications are those formed by a discontinuos phase consisting of fiber (carbon) and a continuos phase called matrix (polymer). The production technologies that provide for the combination of the matrix with fibers arranged according to the predetermined directions during the structural calculation phase, allow to make composites with mechanical properties finalized, that is: - the mechanical properties of fibers (carbon 1K 1000 microwires to build ONE) - their orientation - their length - the mechanical properties of the polymechanical matrix - the chemical properties of the matrix - the behavior of the interface between fiber and matrix (adhesion) Carbon fibers can be classified according to the precursor material used in the production phase, which can be pitch, rayon, PAN.Epoxy resins belong to the class of thermosetting resins and are prepared from low molecular weight and low viscosity agents so that they can easily engage the fibers.EPOXY RESINS are more expensive than the most common polyester or phenolic resins but, unlike these, they have a very high adhesion and better chemical resistance, as well as a high dimensional stability, a very important characteristic for a composite material.Generally carbon fibers are not used as they are but are processed with textile looms in order to obtain real fabrics (weft and warp interface).When the quantity of fibers in one direction (generally the warp) becomes predominant, UNIDIRECTIONAL FABRICS occur.These types of fabrics allow you to take full advantage of the mechanical characteristics of the fibers along precise directions.Along the other directions, fibers of different material may also be present in order to maintain the dimensional stability of the dry material without diminishing the drapeability.THE MAIN ADVANTAGE of UNIDIRECTIONAL FABRICS is the possibility of being able to POSITION the optimal quantity of fibers exactly WHERE THEIR PROPERTIES are required and are macroscopically STRAIGHT. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. AB1 TACKLE costruisce i propri componenti 100% made in Italy. All'interno di una propria filiera chiusa, progetta e costruisce tutti i componenti necessari: il passante guida filo roller AB1, il manico curvo e/o dritto, il porta mulinello ed il pedone passante tutti realizzati in carbonio strutturale AB1. Innovativi e coperti da brevetto internazionale, I roller AB1 hanno un sistema basculante che accompagna la flessione del blank nei vari punti dell'asse, evitando quindi l'insorgere di vizi meccanici che ne comprometterebbero le caratteristiche progettuali. I roller AB1 sono adatti per l'utilizzo sia del monofilo che del dyneema. Il manico AB1 in carbonio strutturale, essendo costruito in materiale composito, non interrompe l'azione del blank al bicchierino di innesto, ma prosegue fino alla crocera, conferendo così all'attrezzo le caratteristiche mono fusto e comunque la praticità di essere smontato in due pezzi. Il porta mulinello AB1 in carbonio strutturale, costruito in forma stratificando i tessuti, non interrompe l'azione del blank nel punto di fissaggio, flette e nel contempo incrementa la velocità della reazione. Il pedone passante AB1 in carbonio strutturale, da utilizzare con blank mono fusto, non pregiudica l'azione progettuale dell'attrezzo, ma interviene oltre i 40° di flessione del manico e imprime una spinta poderosa evitando fenomeni parabolici e vuoti di potenza. I materiali compositi per applicazioni strutturali, a più elevate prestazioni, sono quelli formati da una fase discontinua costituita da FIBRE (carbonio) e una fase Continua detta MATRICE (POLIMERICA). Le tecnologie di produzione che prevedono la combinazione della matrice con fibre disposte secondo direzioni predeterminate in fase di calcolo strutturale, permettono di REALIZZARE COMPOSITI CON PROPRIETA' MECCANICHE FINALIZZATE che dipendono dai componenti utilizzati per la loro produzione, ovvero : - le proprietà meccaniche delle fibre (carbonio 1K 1000 microfili per costruirne UNO) - il loro orientamento - la loro lunghezza - le proprietà meccaniche della matrice polimerica - le proprietà chimiche della matrice - il comportamento dell'interfaccia fra fibra e matrice (adesione) Le fibre di carbonio si possono classificare in base al materiale precursore utilizzato in fase di produzione, che può essere pece , rayon , PAN. Le resine epossidiche appartengono alla classe delle resine termoindurenti sono preparate a partire da reagenti a basso peso molecolare e a bassa viscosità in modo che possano facilmente impregnare le fibre. Le resine epossidiche, più costose delle commerciali resine poliesteri o fenoliche, possiedono caratteristiche uniche tra le quali un‘ elevata aderenza e una migliore resistenza chimica, oltre ad un’ elevata stabilità dimensionale, caratteristica molto importante per un materiale composito. Generalmente le fibre di carbonio non vengono utilizzate così come sono ma vengono processate con i telai tessili al fine di ottenere dei veri e propri tessuti (interfaccia di trama e ordito). Quando la quantità di fibre in una direzione (generalmente l'ordito) diventano predominanti , si hanno TESSUTI UNIDIREZIONALI. Questi tipi di tessuti permettono di sfruttare appieno LE CARATTERISTICHE MECCANICHE DELLE FIBRE LUNGO DIREZIONI PRECISE. Lungo le altre direzioni possono essere presenti anche delle fibre di materiale differente con lo scopo di mantenere la stabilità dimensionale del materiale a secco senza però diminuire la drappeggiabilità. IL PRINCIPALE VANTAGGIO dei TESSUTI UNIDIREZIONALI è la possibilità di potere POSIZIONARE la quantità ottimale di fibre esattamente DOVE LE LORO PROPRIETA' sono richieste e sono macroscopicamente DRITTE. Reel Seat full carbon fiber Fuji Sic Unidirectional structure Blank Pry acid system Each blank tested on goniometric wall Under wrap resined one by one Triple wrap resined one by one 3 hands of Ultra V finish</p><table><thead class="pestit"><tr><td>Modello</td><td>Modello</td><td>Lunghezza</td><td>Best Drag</td><td>Max Drag</td><td>Fighting Drag</td><td>Fast Limited</td></tr></thead><tbody class="pestxt"><tr><td>AB1 MARBLE Prime Roller</td><td>Prime Roller</td><td>1.66 MT / 6'</td><td>6 KG / 13 LBS</td><td>14 KG / 30 LBS</td><td></td><td></td></tr></tbody></table>
Price €1,050.00
rating 0 review
AB1 MARBLE Prime Player AB1 MARBLE Prime Player

AB1 MARBLE Prime Player

<p>AB1 sport fishing rods are specially built for maximum performance, they are not made in bulk production, Each blank is built one by one and tested on a dyno. (geometric wall). It is a unique constructional concept and very exclusive, combined with the AB1 components. The companys philosophy out of the series of commercial dynamics provides the starting point of which each individual rod is made, dressed with sartorial quality and providing it with proven and certified mechanical specifications. AB1 designs and builds its products in a 100% closed supply chain, 100% made in Italy: blanks and components: statically tested in the laboratories and dynamically at sea with the team of experts and elite sport fishermen affiliated to the company. The decision to buy an AB1 product is like a decision to have a tailored made suit, because it dresses the passion of a sport fisherman. AB1 employs a staff of highly qualified consultants in sport fishing who listen to the customer's needs, interacting with AB1 engineers and Rod Builders: AB1 thus offers the prototype of what will be the finished product. Choosing to buy an AB1 Rod is transforming your technical ideas into an executive project that will be YOUR fishing rod, unique and personal because YOUR ego is YOUR passion. AB1 TACKLE builds all there products 100% in Italy.Within its own closed supply chain, it designs and builds all the necessary components: the AB1 full floating roller guide system (world wide Patented) , the AB1 curved and straight butts are in structural carbon fiber, the AB1 reel seat and, the AB1 fighting belt also in full carbon fiber.Innovative and covered by international patents, the AB1 roller guides have a joint system that accompanies the flexing of a blank, making the blank work naturally like if there were no rollers on it., working smoothly with no tension that your normal conventional rollers create when bending the blank, also giving the rod a more powerful rebound when in battle! The AB1 handle in full structural carbon fiber, being made of composite material, does not interrupt the action of the blank, the handle compliments the action of the blank and reinforces the rebound with a synthesized flex, thus giving the rod a single-barrel characteristics and also the practicality of being dismantled in two pieces. The AB1 reel seat in structural carbon fiber, built one by one layering the fabrics, does not interrupt the action of the blank at the fixing point, it flexes at the same time and increases the speed of the reaction.The AB1 structural carbon real seat, to be used with a single-stem blank, does not affect the designed action of the blank, interacts at 40° of flexion of the blank and gives a powerful thrust avoiding parabolic phenomena and power gaps. The structure of the ab1 blanks are layed out one by one. The composite materials for higher performance, for structural applications are those formed by a discontinuos phase consisting of fiber (carbon) and a continuos phase called matrix (polymer). The production technologies that provide for the combination of the matrix with fibers arranged according to the predetermined directions during the structural calculation phase, allow to make composites with mechanical properties finalized, that is: - the mechanical properties of fibers (carbon 1K 1000 microwires to build ONE) - their orientation - their length - the mechanical properties of the polymechanical matrix - the chemical properties of the matrix - the behavior of the interface between fiber and matrix (adhesion) Carbon fibers can be classified according to the precursor material used in the production phase, which can be pitch, rayon, PAN.Epoxy resins belong to the class of thermosetting resins and are prepared from low molecular weight and low viscosity agents so that they can easily engage the fibers.EPOXY RESINS are more expensive than the most common polyester or phenolic resins but, unlike these, they have a very high adhesion and better chemical resistance, as well as a high dimensional stability, a very important characteristic for a composite material.Generally carbon fibers are not used as they are but are processed with textile looms in order to obtain real fabrics (weft and warp interface).When the quantity of fibers in one direction (generally the warp) becomes predominant, UNIDIRECTIONAL FABRICS occur.These types of fabrics allow you to take full advantage of the mechanical characteristics of the fibers along precise directions.Along the other directions, fibers of different material may also be present in order to maintain the dimensional stability of the dry material without diminishing the drapeability.THE MAIN ADVANTAGE of UNIDIRECTIONAL FABRICS is the possibility of being able to POSITION the optimal quantity of fibers exactly WHERE THEIR PROPERTIES are required and are macroscopically STRAIGHT. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. Le canne per la pesca sportiva AB1 sono costruite utilizzando blanks progettati specificatamente per ogni attrezzo della gamma: non sono commerciali e a catalogo, ma realizzati dall'ingegneria AB1 con caratteristiche meccaniche specifiche. E' un concetto costruttivo unico, che diventa esclusivo nell'attrezzo finito con i componenti AB1. La filosofia aziendale “fuori dalle serialità delle dinamiche commerciali”, costituisce il punto di partenza con cui viene realizzato ogni singolo attrezzo. La qualità sartoriale di ogni singolo pezzo è garantita anche identificandolo con specifiche e certificate prove meccaniche. AB1 progetta e costruisce al 100% in una filiera chiusa, 100% made in Italy: blanks, componenti, custom personalizzato. Inoltre, effettua una verifica statica nei laboratori e dinamica in mare con il Team di esperti e titolati pescatori sportivi affiliati all'azienda. La scelta di acquistare un attrezzo AB1 si equipara alla decisione di farsi confezionare un abito sartoriale poiché veste la passione del pescatore sportivo, dall'estetica della livrea alle performance tecniche specifiche per tipologia di pesca. AB1 si avvale di uno staff di consulenti, altamente qualificati nella pesca sportiva che ascoltano le esigenze del cliente, interagiscono con gli ingegneri AB1 e il Rod Builder: AB1 propone così il prototipo di quello che sarà l'attrezzo finito. Scegliere di acquistare un attrezzo AB1 è trasformare le tue idee tecniche in progetto esecutivo e sarà la TUA canna da pesca, unica e personale perché rappresenta il TUO ego e la TUA passione. AB1 TACKLE costruisce i propri componenti 100% made in Italy. All'interno di una propria filiera chiusa, progetta e costruisce tutti i componenti necessari: il passante guida filo roller AB1, il manico curvo e/o dritto, il porta mulinello ed il pedone passante tutti realizzati in carbonio strutturale AB1. Innovativi e coperti da brevetto internazionale, I roller AB1 hanno un sistema basculante che accompagna la flessione del blank nei vari punti dell'asse, evitando quindi l'insorgere di vizi meccanici che ne comprometterebbero le caratteristiche progettuali. I roller AB1 sono adatti per l'utilizzo sia del monofilo che del dyneema. Il manico AB1 in carbonio strutturale, essendo costruito in materiale composito, non interrompe l'azione del blank al bicchierino di innesto, ma prosegue fino alla crocera, conferendo così all'attrezzo le caratteristiche mono fusto e comunque la praticità di essere smontato in due pezzi. Il porta mulinello AB1 in carbonio strutturale, costruito in forma stratificando i tessuti, non interrompe l'azione del blank nel punto di fissaggio, flette e nel contempo incrementa la velocità della reazione. Il pedone passante AB1 in carbonio strutturale, da utilizzare con blank mono fusto, non pregiudica l'azione progettuale dell'attrezzo, ma interviene oltre i 40° di flessione del manico e imprime una spinta poderosa evitando fenomeni parabolici e vuoti di potenza. I materiali compositi per applicazioni strutturali, a più elevate prestazioni, sono quelli formati da una fase discontinua costituita da FIBRE (carbonio) e una fase Continua detta MATRICE (POLIMERICA). Le tecnologie di produzione che prevedono la combinazione della matrice con fibre disposte secondo direzioni predeterminate in fase di calcolo strutturale, permettono di REALIZZARE COMPOSITI CON PROPRIETA' MECCANICHE FINALIZZATE che dipendono dai componenti utilizzati per la loro produzione, ovvero : - le proprietà meccaniche delle fibre (carbonio 1K 1000 microfili per costruirne UNO) - il loro orientamento - la loro lunghezza - le proprietà meccaniche della matrice polimerica - le proprietà chimiche della matrice - il comportamento dell'interfaccia fra fibra e matrice (adesione) Le fibre di carbonio si possono classificare in base al materiale precursore utilizzato in fase di produzione, che può essere pece , rayon , PAN. Le resine epossidiche appartengono alla classe delle resine termoindurenti sono preparate a partire da reagenti a basso peso molecolare e a bassa viscosità in modo che possano facilmente impregnare le fibre. Le resine epossidiche, più costose delle commerciali resine poliesteri o fenoliche, possiedono caratteristiche uniche tra le quali un‘ elevata aderenza e una migliore resistenza chimica, oltre ad un’ elevata stabilità dimensionale, caratteristica molto importante per un materiale composito. Generalmente le fibre di carbonio non vengono utilizzate così come sono ma vengono processate con i telai tessili al fine di ottenere dei veri e propri tessuti (interfaccia di trama e ordito). Quando la quantità di fibre in una direzione (generalmente l'ordito) diventano predominanti , si hanno TESSUTI UNIDIREZIONALI. Questi tipi di tessuti permettono di sfruttare appieno LE CARATTERISTICHE MECCANICHE DELLE FIBRE LUNGO DIREZIONI PRECISE. Lungo le altre direzioni possono essere presenti anche delle fibre di materiale differente con lo scopo di mantenere la stabilità dimensionale del materiale a secco senza però diminuire la drappeggiabilità. IL PRINCIPALE VANTAGGIO dei TESSUTI UNIDIREZIONALI è la possibilità di potere POSIZIONARE la quantità ottimale di fibre esattamente DOVE LE LORO PROPRIETA' sono richieste e sono macroscopicamente DRITTE. Reel Seat full carbon fiber Fuji Sic Unidirectional structure Blank Pry acid system Each blank tested on goniometric wall Under wrap resined one by one Triple wrap resined one by one 3 hands of Ultra V finish</p><table><thead class="pestit"><tr><td>Modello</td><td>Modello</td><td>Lunghezza</td><td>Best Drag</td><td>Max Drag</td><td>Fighting Drag</td><td>Fast Limited</td></tr></thead><tbody class="pestxt"><tr><td>AB1 MARBLE Prime Player</td><td>Prime Player</td><td>2.1 MT / 6'9''</td><td>2 KG / 4.4 LBS</td><td>5 KG / 11 LBS</td><td></td><td></td></tr></tbody></table>
Price €550.00
rating 0 review
SUGOI ALTRURIA TROLLING SUGOI ALTRURIA TROLLING

SUGOI ALTRURIA TROLLING

<p>Canna da trolling indicata per il big game fishing. La componentistica di qualità di questa canna da pesca ne esalta l’estrema potenza. Altruria è realizzata con un fusto in carbonio Extreme, anelli roller in acciaio inox e placca porta mulinello in alluminio.Ottima sia per la pesca a Drifting al tonno che per la Traina d’Altura. Fusto in Carbon Extreme Anelli a carrucola in Acciaio Inox Placca porta mulinello in Lega di Alluminio Impugnatura in Gomma</p><table><thead class="pestit"><tr><td>Codice</td><td>Modello</td><td>Lunghezza</td><td>Lunghezza ft</td><td>LBS</td><td>Sezioni</td><td>Peso gr</td></tr></thead><tbody class="pestxt"><tr><td>287178</td><td>ALTRURIA TROLLING 50-80LBS mt.1.70</td><td>1.70</td><td>5'6"</td><td>50-80</td><td>1</td><td>575</td></tr></tbody></table>
Price €165.00
rating 0 review
AKAMI KANMON AKAMI KANMON

AKAMI KANMON

<p>Akami Kanmon studiata per la pesca a traina, ideale per i pescatori esigenti. Una canna da trolling progettata con una conformazione robusta e resistente. Design elegante, assemblato con fusto in carbonio ad alto modulo, placca porta mulinello in alluminio forgiato e guide Sea Guide®. Presa comoda e resistente, realizzata in morbida eva. Fusto High Modulus Carbon Puntale ed anelli Sea Guide® Placca in alluminio forgiato Impugnatura in Eva Custodia in dotazione. Fusto High Modulus Carbon Puntale ed anelli Sea Guide® Placca in alluminio forgiato Impugnatura in Eva Custodia in dotazione</p><table><thead class="pestit"><tr><td>Codice</td><td>Modello</td><td>Lunghezza</td><td>Lunghezza ft</td><td>LBS</td><td>Sezioni</td><td>Peso gr</td></tr></thead><tbody class="pestxt"><tr><td>287147</td><td>KANMON 7' LBS 12</td><td>2.13</td><td>7’0”</td><td>12</td><td>1</td><td>310</td></tr><tr><td>287148</td><td>KANMON 7' LBS 20</td><td>2.13</td><td>7’0”</td><td>20</td><td>1</td><td>325</td></tr></tbody></table>
Price €95.00
rating 0 review
Apia Gannet Plus Floating... Apia Gannet Plus Floating Jacket

Apia Gannet Plus Floating Jacket

<p>Gannet Plus is a floating jacket with a pocket on the Ganet Ballistic® (released in March 2021) that offers both mobility and storage capacity. By combining the thin body of Gannet with a thin pocket that can hold one 3010 NDM type lure box, we have overcome the drawbacks of many wading vests that the pockets interfere and it is difficult to see your feet.</p> <p>This feature matches the fishing of the shore, which is mainly Langan, rather than the fishing of the offshore shore, which is carried out by setting up a base camp. We would like all anglers who enjoy rocky shore fishing such as rocky shore games, light games, and egging to wear it.</p> <p></p> <p><iframe width="990" height="540" style="background-image:url(&quot;img/object.gif&quot;);" src="https://www.youtube.com/embed/yQtC6fXrgYo" title="YouTube video player" frameborder="0"></iframe></p>
Price €195.00
rating 0 review
Ja-do multi-use seat Ja-do multi-use seat

Ja-do multi-use seat

<p>Ja-do multi-use seat </p> <p>It can be used as a luggage seat, seat cover, picnic seat, etc., and can also be used as a large tote bag. In addition, it can be used as a tape measure that can measure up to 150 cm by combining it with the Ja-do wide tape measure (sold separately)! Since it is made of PVC, it can be washed, spread and dried!</p> <p>Size: 1050 × 1700mm Material: PVC</p> <p>please click on the picture to see the video</p> <p><a href="https://www.youtube.com/watch?v=z_RnrgxlxPc"><img src="https://www.pescare.it/img/cms/video.jpg" alt="" width="1179" height="666" /></a></p>
Price €53.00
rating 0 review