IKA LARK 150

Ika Lark 150 An easy-to-use and speedy Tsuno (squid lure) inserter for the setting and casting control of Tsuno (squid lures) at the height of your waist. The rubber holder can be inverted according to the wind direction and fishing position, and Tsuno (squid lures) are adsorbed onto the super-strong magnet incorporating the holder. The product prevents main line entanglement by just hanging the line downward. The rod holder at the height of the waist allows jerking. torage size (when folded): 380 × 120 × 90 mm Provided Tsuno (Squid Lure) Mat size: 405 × 90 × 13 mm (Mat part: 306 × 48 mm) Weight 1.5 kg (when accommodated in dedicated storage bag, including Tsuno (Squid Lure) Mat) Accessories: Tsuno (Squid Lure) Mat and storage bag Tsuno and Sutte (squid lures) are perfectly adsorbed to the super-strong magnet (neodymium) downward to protect the hook tips from damage. Prevents main line and leader line entanglement by just hanging them downward. Boat side mounting method 1) Pull out the clamp (vice) and sandwich and secure the product on the boat side with the stabilizing rubber. 2) Loosen the red screw, determine the position of the holder incorporating a magnet on the starboard or port side according to the wind direction and invert the holder. 3) Set the line hook on the sea side, and fasten the rubber holder by tightening the red screw. 4) Raise the rod holder and complete the installation. * Set the product in use according to the wind and tide. Reverse the direction of the rubber holder according to the wind direction and fishing position on the starboard or port side. * Be sure not to set the holder in the wrong direction. Doing so may result in main line entanglement. Tsuno (squid lure) casting method 1) Lightly hook the main line from the reel to the line hook. 2) Be sure to let the Tsuno (squid lures) adsorb to the outer magnets of the rod holders in order beginning with number one. 3) Make sure that the leader line is free of kinks before setting the Tsuno (squid lures) on the magnet. The main line may get entangled with the hook tips if the kinks are not removed. The kinks will decrease if a number of snap swivels are attached up and down. 4) Prevents main line and branch leader line entanglement by just hanging them downward. 5) Lightly cast of the sinker in the horizontal direction as far as possible with the signal of the boat skipper. 6) The rod holder at the height of the waist (40 cm above the boat side) allows ease of jerking. 7) Rotate the rubber holder a little for use if the rubber holder is obstructive at the time of recovery.